| PaqPlace
For your Compaq |
Compaq SoftPaq Driver & Software Archive |
|
|
|
SP3898 — Japanese Support Software for Windows NT 3.51 and 4.0 VERSION 1.22J Rev B
| SoftPaq Number |
SP3898 |
| Filename |
SP3898.EXE |
| Size |
6202K |
| Date |
22 August 97 |
| Version |
N/A |
| Operating System |
All |
Readme
SOFTPAQ NUMBER: SP3898
PART NUMBER: 276302-291, 276303-291, 276304-291, 276305-291, 276306-291
FILE NAME: NTSSD
TITLE: Japanese Support Software for Windows NT 3.51 and 4.0
VERSION: 1.22J Rev B
LANGUAGE: Japanese
CATEGORY: Systems/Drivers
PRODUCTS AFFECTED: Compaq ProLiant, ProSignia and SystemPro Servers;
Compaq Professional Workstations
OPERATING SYSTEM: Microsoft Windows NT 3.51/4.0 (Japanese)
SYSTEM CONFIGURATION: N/A
EFFECTIVE DATE: 7 August 1997
ELECTRONIC DISTRIBUTION ALLOWED: Yes
SOFTPAQ UTILITY VERSION: 2.X
SUPERSEDES: SP3735
DESCRIPTION: This SoftPaq is for Japanese products, and cannot be run
in United States mode. It creates five diskettes:
- Two-diskette set for Compaq Support Software for MS Windows NT 3.51
and 4.0 (NT SSD kit), which provides the necessary drivers for
Windows NT 3.51/4.0 (Japanese) on Compaq Servers and Professional
Workstations.
- Three diskettes for Windows NT drivers for the following subsystems:
- Matrox Millennium video controller
- ELSA Gloria-L video controller
- ESS AudioDrive audio controller
Setup program is found problem that when user upgrade CPU into sp installed
machine, setupapp could not prompt media change messages and down program.
This revision is fixed the problem.
Windows NT3.51 support only added file for 3-mode floppy driver.
HOW TO USE:
1. Obtain five(5) formatted 1.44 MB diskettes.
2. Download the SoftPaq to a directory on your hard drive and change
to that directory. The file that is downloaded is an executable with
a filename based on the SoftPaq Number above.
3. From that drive and directory, execute the downloaded file
and follow the on-screen instructions. You will be prompted to
insert the formatted diskettes in a drive to create the diskettes.
4. After the diskettes have been created, you may delete the
SoftPaq file downloaded in step 2.
5. For installation instructions, run README on the 1st created diskette.
Copyright 1997, Compaq Computer Corporation. All rights reserved.
Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.
PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
|
Home
|