SOFTPAQ NUMBER:  SP3886
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Deskpro/ProLinea Windows NT 4.0 Universal Video Driver Manager 
VERSION:  1.10.00 Rev A   
LANGUAGE:  Spanish

CATEGORY:  Desktops/Drivers

PRODUCTS AFFECTED:  Deskpro 2000 Series, Deskpro 4000 and Deskpro 4000S Series,
                    Deskpro 6000 Series, Deskpro XL, selected early Deskpro and 
                    Prolinea models

OPERATING SYSTEM:  Microsoft Windows NT 4.0

SYSTEM CONFIGURATION:  
This Universal Video Driver Manager supports any of the following graphics 
controllers:
Matrox Millennium
S3 ViRGE
S3 V2
Cirrus Logic 5434
Cirrus Logic 5436
Cirrus Logic 5446
Compaq QVision 1280P/1280P+

EFFECTIVE DATE:  17 July 1997 

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  3.1

SUPERSEDES:  SP3791

DESCRIPTION:  Unpacks the files needed to install a Windows NT 4.0 application 
program that detects the type of graphics controller in Deskpro and ProLinea 
computers and installs the appropriate Windows NT 4.0 video driver that supports it.  
It is intended for the models and graphics controllers listed above.
New features for this version include:
- SETUPUDM runs either directly from hard drive or diskette
- Allows SETUPUDM.EXE to run from a directory other than the current directory
- Insures that the exiting dialog box comes out on the top window
- Allows SETUPUDM.EXE to run across an NT to NT network connection
- Enhance error message displayed if a QV2000/2000+ card is in the system

Video drivers included in this SoftPaq:
Deskpro 2000/4000 Windows NT 4.0 Graphics Drivers (SoftPaq SP3501)
Matrox Millennium, Ver 3.53.016 (SoftPaq SP2934)

HOW TO USE:

1. Download the SoftPaq to a temporary, empty directory on your 
hard drive.  The file downloaded is a self-extracting executable 
with a filename based on the SoftPaq Number above.

2. From the download directory, execute the SoftPaq.  When executed 
with no parameters, files are extracted into the current directory.
To extract the files into a different directory, specify the complete 
path of the directory as a parameter:

     SPxxxx <path> 

Enter "Y" to confirm and files are unpacked into the download 
directory or the directory specified.  

3. After the files have been created, you may delete the  
self-extracting file downloaded in step 1.

4. The application may be installed directly from the files on the 
download directory or a set of diskettes can be created.  
To create a set of diskettes, run MAKEDISK.BAT.
To start the application, select Start, Run.
Then type the path to the download directory and the application 
name (SETUPUDM.EXE).
Example: 
   c:\<path>\setupudm
Press the Enter key or click OK.

To run the application from diskette, put the first diskette created 
by running MAKEDISK.BAT into the diskette drive. Select Start, Run and 
type the diskette drive path and the application name (SETUPUDM.EXE). 
Example:
   a:\setupudm
Press the Enter key or click OK.

5. The Universal Driver Manager detects the current display adapter
and checks to see if it is a supported graphics controller.  If the
currently active graphics controller in the system is not a 
supported controller (see above list), an error message is displayed.

6. If a supported controller is found, a message is displayed
showing which one was found.  Select OK to start installing the driver.
Follow the on-screen instructions and reboot the system to activate
the new driver.

7. After the driver has been installed, you may delete the files 
from the download directory if you wish.

Copyright 1997, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies