ROMPAQ NUMBER:  SP3843
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Compaq Netelligent 56K ISA Modem Firmware Upgrade 
VERSION:  1.00
LANGUAGE:  English

CATEGORY:  RomPaq

PRODUCTS AFFECTED:  Compaq Netelligent 56K ISA Data/Fax Modem (Firmware Ver .519)

OPERATING SYSTEM:  Microsoft Windows 95 (DOS session), Windows 3.1, or MS DOS 6.2

SYSTEM CONFIGURATION:  IBM Compatible 486DX2/66 or greater with 4 MB system RAM, 
at least 35MB of free hard disk space, and an empty ISA slot

EFFECTIVE DATE:  01 August 1997

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.x

SUPERSEDES:  N/A

DESCRIPTION:  Creates a diskette used to upgrade the firmware version to 1.00 for a 
Compaq Netelligent 56K ISA Data/Fax Modem with firmware version .519.
This version fixes the following problems:
-  AT#VTS locks up modem when it is onhook.
-  Voice call first V.8 CI has no cadence.
-  Intermittently connections are too aggressive, causing data errors in normal mode.
-  TX power of ATDT and #VTS tones are too low.
-  NVRAM initialization.
-  Fax CNG tone detection.
-  Connection problem with Lucent modem.
-  V.61 voice call should be activated first.
-  No attempt to do K56flex in voice mode.
-  Modem does not send Link Disconnect.
-  Adaptive answer +FAE timeout.
-  VRPI/V80 underrun.
-  Allows retrains to re-evaluate K56 connections.
-  Lockup when answer tone is not seen.
-  Receive speed is not reported in VRPI mode.
-  Modem can't detect RING after a DTR drop.
-  Lockup when key abort on originate modem during answer tone.
-  Hang-up and DTR drop causes the modem to act differently.

HOW TO USE:

1. Obtain a formatted 1.44-MB diskette.

2. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is an executable with 
a filename based on the SoftPaq Number above.

3. From that drive and directory, execute the downloaded file 
and follow the on-screen instructions.  You will be prompted to 
insert the formatted diskette in a drive to create the diskette.

4. After the diskette has been created, you may delete the  
SoftPaq file downloaded in step 2.

5. Refer to the README.TXT file on the diskette for upgrade instructions.

Copyright 1997, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered 
trademarks of their respective companies