| PaqPlace
For your Compaq |
Compaq SoftPaq Driver & Software Archive |
|
|
|
SP3839 — Deskpro 2000 S3 Display Support for OS/2 VERSION 3.03 LANGUAGE English PRODUCTS AFFECTED Deskpro 2000 Series with the S3 V2/GX graphics controller, including models announced July 1997 NOTE To determine whether your unit has the video controller supported by this driver, refer to step 4 in the HOW TO USE section below. OPERATING SYSTEM IBM OS/2
| SoftPaq Number |
SP3839 |
| Filename |
SP3839.EXE |
| Size |
1645K |
| Date |
16 July 97 |
| Version |
N/A |
| Operating System |
All |
Readme
SOFTPAQ NUMBER: SP3839
PART NUMBER: N/A
FILE NAME: N/A
TITLE: Deskpro 2000 S3 Display Support for OS/2
VERSION: 3.03
LANGUAGE: English
CATEGORY: Desktops/Driver
PRODUCTS AFFECTED: Deskpro 2000 Series with the S3 V2/GX graphics
controller, including models announced July 1997
NOTE: To determine whether your unit has the video controller
supported by this driver, refer to step 4 in the HOW TO USE
section below.
OPERATING SYSTEM: IBM OS/2
SYSTEM CONFIGURATION: Compaq S3 V2/GX video graphics controller
EFFECTIVE DATE: 10 July 1997
ELECTRONIC DISTRIBUTION ALLOWED: Yes
SUPERSEDES: N/A
DESCRIPTION: This SoftPaq unpacks the files required to install
the video driver for IBM OS/2 for the S3 V2/GX controller
used in certain Deskpro 2000 models, including those announced in
July 1997.
HOW TO USE:
1. Download the SoftPaq to a temporary, empty directory on your
hard drive. The file downloaded is a self-extracting executable
with a filename based on the SoftPaq Number above.
2. From the download directory, execute the SoftPaq. When executed
with no parameters, files are extracted into the current directory.
To extract the files into a different directory, specify the complete
path of the directory as a parameter:
SPxxxx <path>
Enter "Y" to confirm and files are unpacked into the download
directory or the directory specified.
3. After the files have been created, you may delete the
self-extracting file downloaded in step 1.
4. To install the driver, open an OS/2 full-screen or OS/2 window session.
At the OS/2 command prompt, type in the path to SETUP.EXE in the download
directory and press ENTER:
c:\<path>\setup
Follow on-screen instructions and select VGA mode.
5. When the installation is complete, shut down and restart the computer for
the changes to take effect.
6. After the driver has been installed, you may delete the files
from the download directory if you wish.
Copyright 1997, Compaq Computer Corporation. All rights reserved.
Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies
PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
|
Home
|