SOFTPAQ NUMBER:  SP3778
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Deskpro/ProLinea Windows 95 Universal Video Driver Manager 
VERSION:  1.00 Rev A
LANGUAGE:  English

CATEGORY:  Drivers/Video

PRODUCTS AFFECTED:  Deskpro 2000 Series, Deskpro 4000 and Deskpro 4000S Series,
                    Deskpro 6000 Series, Deskpro XL, selected early Deskpro and 
                    Prolinea models

OPERATING SYSTEM:  Microsoft Windows 95

SYSTEM CONFIGURATION:  
One of the following graphics controllers:
Matrox Millennium
Matrox QVision 2000/2000+ (Drivers only, no Power Desk)
S3 ViRGE
S3 V2
Cirrus Logic 5434
Cirrus Logic 5436
Cirrus Logic 5446
Compaq QVision 1280P/1280P+

EFFECTIVE DATE:  July 1997 

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION: 3.1

SUPERSEDES: N/A

DESCRIPTION:  Unpacks the files needed to install a Windows 95 application 
program that detects the type of graphics controller in Deskpro and ProLinea 
computers and installs the appropriate Windows 95 video driver that supports it.  
It is intended for the models and graphics controllers listed above.

Video drivers included in this SoftPaq:
Deskpro 2000/4000 Windows 95 Graphics Drivers (SoftPaq SP3761)
Matrox Millennium, Ver 3.53.016 (SoftPaq SP3814)
Matrox QVision 2000/2000+, Ver 2.01 (SoftPaq SP1493)


HOW TO USE:

1. Download the SoftPaq to a temporary, empty directory on your 
hard drive.  The file downloaded is a self-extracting executable 
with a filename based on the SoftPaq Number above.

2. From the download directory, execute the SoftPaq.  When executed 
with no parameters, files are extracted into the current directory.
To extract the files into a different directory, specify the complete 
path of the directory as a parameter:

     SPxxxx <path> 

Enter "Y" to confirm and files are unpacked into the download 
directory or the directory specified.  

3. After the files have been created, you may delete the  
self-extracting file downloaded in step 1.

4. To start the application, select Start, Run.
Then type the path to the download directory and the application 
name (SETUPUDM.EXE).
Example: 
   c:\<path>\setupudm
Press the Enter key or click OK.

5. The Universal Driver Manager detects the current display adapter
and checks to see if it is a supported graphics controller.  If the
currently active graphics controller in the system is not a 
supported controller (see above list), an error message is displayed.

6. If a supported controller is found, a message is displayed
showing which one was found.  Select OK to start installing the driver.
Follow the on-screen instructions and reboot the system to activate
the new driver.

7. After the driver has been installed, you may delete the files 
from the download directory if you wish.

Copyright 1997, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies