SOFTPAQ NUMBER:  SP3746
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Deskpro 2000/4000 Windows 95 Graphics Drivers 
VERSION:  1.90 Rev A
LANGUAGE:  Chinese

CATEGORY:  Drivers/Video

PRODUCTS AFFECTED:  Deskpro 2000/4000 Series models containing 
                    any of the graphics controllers listed in 
                    the System Configuration section below.
NOTE:  To determine whether your unit has a video controller
       supported by this driver, refer to step 4 in the HOW TO USE 
       section below.

OPERATING SYSTEM:  Microsoft Windows 95

SYSTEM CONFIGURATION:  Compaq S3 V2/GX, ViRGE/GX, CL5434, CL5436, 
CL5446, QVision 1024 I/E, or QVision 1280 I/E/P/P+ graphics controller
0EFFECTIVE DATE:  July 1997 

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SUPERSEDES:  N/A

DESCRIPTION:  This SoftPaq unpacks the files required to install the 
Windows 95 video driver for certain Deskpro 2000/4000 Series models, 
including those announced in July 1997.  Driver support is included for 
Compaq S3 V2/GX, ViRGE/GX, CL5434, CL5436, CL5446, QVision 1024 I/E, and 
QVision 1280 I/E/P/P+ graphics controllers.

HOW TO USE:

1. Download the SoftPaq to a temporary, empty directory on your 
hard drive.  The file downloaded is a self-extracting executable 
with a filename based on the SoftPaq Number above.

2. From the download directory, execute the SoftPaq.  When executed 
with no parameters, files are extracted into the current directory.
To extract the files into a different directory, specify the complete 
path of the directory as a parameter:

     SPxxxx <path> 

Enter "Y" to confirm and files are unpacked into the download 
directory or the directory specified.  

3. After the files have been created, you may delete the  
self-extracting file downloaded in step 1.

4. To install the driver, go to the Control Panel and select:

   Display/Settings/Change Display Type

Verify that the Adapter Type is one of the controllers listed in
the System Configuration section above.
If it is not, then Cancel and Exit.
If it is, then continue to select:
    
   Change/Have Disk

Type in the path to the download directory or select "Browse" to 
specify the location of the files extracted in step 2.

5. Select OK to install the driver.

6. After the driver has been installed, you may delete the files 
from the download directory if you wish.

Copyright 1997, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies