| PaqPlace
For your Compaq |
Compaq SoftPaq Driver & Software Archive |
|
|
|
SP3589 — Deskpro Operating System Installation Readiness Utility (OSIRU) VERSION 2.00 Rev A LANGUAGE US English PRODUCTS AFFECTED Deskpro 2000 Series, Deskpro 4000 Series, Deskpro 4000N Series, Deskpro 4000S Series, Deskpro 6000 Series NOTE Only supports computers that have an IDE hard drive installed; some Deskpro 2000, 4000, and 6000 Series MMX models do not. OPERATING SYSTEM N/A
| SoftPaq Number |
SP3589 |
| Filename |
SP3589.EXE |
| Size |
116K |
| Date |
29 September 97 |
| Version |
N/A |
| Operating System |
All |
Readme
SOFTPAQ NUMBER: SP3589
PART NUMBER: N/A
FILE NAME: N/A
TITLE: Deskpro Operating System Installation Readiness Utility (OSIRU)
VERSION: 2.00 Rev A
LANGUAGE: US English
CATEGORY: Desktops/Drivers
PRODUCTS AFFECTED:
Deskpro 2000 Series
Deskpro 4000 Series
Deskpro 4000N Series
Deskpro 4000S Series
Deskpro 6000 Series
NOTE: Only supports computers that have an IDE hard drive installed;
some Deskpro 2000, 4000, and 6000 Series MMX models do not.
OPERATING SYSTEM: N/A
SYSTEM CONFIGURATION: N/A
EFFECTIVE DATE: 01 Oct 1997
ELECTRONIC DISTRIBUTION ALLOWED: Yes
SOFTPAQ UTILITY VERSION: 3.1
SUPERSEDES: N/A
DESCRIPTION: Unpacks the files needed to install a utility that partitions
and prepares a hard drive for the installation of an operating system on one
of the above-mentioned Deskpro computers. Optionally creates a diskette.
The utility can be used to build the Compaq System Partition and primary DOS
partition by passing arguments in parameters.
HOW TO USE:
1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename
based on the SoftPaq Number above.
2. Execute the downloaded file and follow the on-screen instructions.
Entering "Y" to confirm the unpacking of files creates a new directory
folder in the download directory. All files are unpacked into this
newly created directory.
Optionally create a diskette, or unpack to a directory other than the download
directory, by executing the SoftPaq file with a path parameter. Example:
SPxxxx <path>
where SPxxxx = name of downloaded SoftPaq file
<path> = alternate path or diskette drive location such as a:\
3. After the directory has been created, you may delete the
self-extracting file downloaded in step 1.
4. For installation instructions, refer to README.TXT in the carve\disk1
directory.
Copyright 1997, Compaq Computer Corporation. All rights reserved.
Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies
PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
|
Home
|