PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP3552

SP3552 — Compaq Support Software for Microsoft Windows NT 4.00 (Files rather than diskettes)

SoftPaq Number SP3552
Filename SP3552.EXE
Size 3468K
Date 22 August 97
Version N/A
Operating System All

  Download SP3552.EXE  


Readme

SOFTPAQ NUMBER:  SP3552
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Compaq Support Software for Microsoft Windows NT 4.00 
        (Files rather than diskettes)
VERSION:  2.00 Rev A
LANGUAGE:  English

CATEGORY:  Systems/Drivers

PRODUCTS AFFECTED:  Compaq Professional Workstation 5000, 6000, and 8000;
                    Compaq ProSignia and ProLiant Servers

OPERATING SYSTEM:  Microsoft Windows NT 4.00

SYSTEM CONFIGURATION:  N/A

EFFECTIVE DATE:  11 August 1997

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.x

SUPERSEDES:  SP3256 for Windows NT 4.0 only

DESCRIPTION:  This SoftPaq creates two files -- a description file and a
large self-extracting executable file.  The self-extracting executable file 
contains Compaq Support Software for Microsoft Windows NT 4.00 
that supports the following subsystems and features of Compaq Professional 
Workstations and ProLiant and ProSignia Servers.

NOTE:  This same software is available in SoftPaq SP3980 in a form that 
creates diskettes rather than copying installation files to the hard disk.

   Compaq Integrated Management Display Utility 
   Compaq Recovery Server, Standby Agent with SMART-2 support 
   Compaq Recovery Server, Online Agent with SMART-2 support 
   Compaq Remote Insight Board driver 
   Compaq Remote Insight Board WAN driver 
   Compaq PCI Hot Plug Utility 
   ProLiant Storage System 
   System Management/Health driver 
   NetFlex-3/Compaq Netelligent 10/100 TX Embedded UTP/Coax network adapter
   NetFlex-3/Compaq Netelligent 10/100 TX Embedded UTP/Coax 
      network adapter monitoring, configuration, and duplex utility 
   Compaq 10T PCI UTP and 10/100 TX PCI UTP 
   IDA/IDA-2 disk controller 
   SMART/SMART-2 array controller 
   32-Bit SCSI-2 Family of controllers 
   Matrox Millennium/Millennium II video controller 
   ELSA Gloria-L video controller 
   ESS AudioDrive audio controller 
   Compaq Support Software diskette Installation utility 

----- Version Numbers -----
Driver File Versions (* indicates new or updated since last release):
  Compaq Support Software Installation Utility version 2.00A *  
  Netflex-3/Compaq 10/100 TX Embedded UTP/Coax driver version 4.07 * 
  Integrated PCI Fast-SCSI-2 driver version 3.00 * 
  Elsa Gloria-L 3D graphics driver version 5.19B 
  Matrox Millennium/Millenium II graphics driver version 3.11A 
  ESS1868 Audio driver version 2.00B 
  System Management/Health driver version 2.40.01 * 
  Shutdown Service version 2.01
  Array driver version 3.00 * 
  Proliant Storage System driver version 2.02 * 
  Compaq Online and Standby Recovery Agent version 2.20 
  Compaq Online and Standby Recovery driver version 1.00 
  Compaq Integrated Management Display Utility version 2.00 * 
  Compaq Remote Insight Board driver version 1.20 *
  Compaq Remote Insight Board WAN driver version 1.0 *
  Compaq Hot-Plug Utility version 2.00 *
  Compaq Remote Monitor Service version 2.00 *
  
----- Enhancements/Fixes in this Release -----
This release supports the new Compaq ProLiant 6500 with hot plug software 
features.  Other enhancements are listed below and in the NTREADME.HLP. 

Compaq Advanced Network Control Utility
- Added support for automatic duplex setting for all duplex 
  auto-negotiation enabled Network Interface Controllers.
- Added support to resolve NetFlex-3 Controller instances resulting from 
  missing Network Interface Controllers.
- Added support for the ProLiant 6500 and PCI adapters.
- Updated Graphical User Interface.
- Added new icons.
- Added support to display the status of PCI Hot Plug compatible Network 
  Interface Controllers.
- Added support to allow NetFlex-3 Controller configuration of a remote 
  computer.
- Added support that enables reboot of a remote computer after 
  configuration.

Compaq Array Drive Driver
- Added System Event Logging support for controller failures and PCI Hot 
  Plug.
- Added new hardware support for the SMART-2DH controller.

Compaq Integrated Management Display Utility
- Fixed context-sensitive help for the tabs located on the Options dialog 
  box.

Compaq NetFlex-3 Controllers
- Corrected a Service Pack #2 problem with the Compaq Advanced Network 
  Utility in Windows NT 4.0.  
- Updated the driver to support the Netelligent 10 T/2 PCI UTP/Coax 
  Controller (a 10Base-T, 10Base-2 combination controller, with an RJ45 and 
  BNC connector).

Compaq PCI Hot Plug
- Added support for Compaq PCI Hot Plug bus.
- Added access capability to remote servers with Compaq PCI Hot Plug.

Compaq Power Down Manger
- Added support  to allow the system manager to configure the power off 
  behavior of the Intelligent Power Switch.

Compaq Remote Monitor Service
- Added control for Compaq PCI Hot Plug.
- Enabled access to servers installed by Compaq remote enabled utilities.

Compaq Remote Insight Management Board 
- Added Integrated Management Log (IML) support for ProLiant 6500 and 
  previous server products.  This new log requires the systems management 
  driver from SSD 2.00 A.
- Added Windows NT graphical remote access support.
  - You can view the console screen remotely and control Windows NT as if 
    you were using the local console.
  - Carbon Copy and pcANYWHERE are supported.
- Added browser support.
  - Netscape Navigator and Internet Explorer are supported.
  - Supports all previous console application features and previous control 
    activities.

Compaq 32-Bit SCSI-2 Controllers
- Added System Event Logging support for controller failures and PCI Hot 
  Plug.

Compaq Support Software Setup Utility
- Added new support for hot plug components, new video drivers, and new 
  power switch application.
- Modified the installation of the remote service to allow more stringent 
  checking with regards to dependent component updates.
- Added support to the Compaq Support Software Setup Utility to correctly 
  identify the ELSA Gloria L/M 3D Graphics driver and the Matrox 
  Millennium/Millennium II Graphics driver.

Compaq System Management Driver
- Added support for ProLiant 6500 health features.
- Added support for Compaq PCI Hot Plug.
- Added support for the Intelligent Power Switch.
- Added support for PCI Hot Plug slots.
- Fixed a driver issue for the ProLiant 6000 redundant fans which requires 
  the use of SSD 1.23 A or SSD 2.00 A. The driver was not reporting fan 
  redundancy to the Insight Agents, though it was reporting correctly to the 
  Event Viewer and the Integrated Management Display.

Compaq Uninterrupted Power Supply
- Removed Compaq Uninterrupted Power Supply (UPS) support for SSD 2.00 A 
  and later.  You can only remove the UPS previously installed on your system 
  before SSD 2.00 A.

Compaq NetFlex/NetFlex-2 Controllers
- Removed all Compaq NetFlex-2 and Integrated NetFlex support for SSD 2.00 
  Rev A and later.  If you only have a NetFlex-2 controller or Integrated NetFlex 
  controller installed on your system, the Network tab in Setup will not 
  appear.

ESS AudioDrive Driver
- Added support for the ES1869.
- Disabled user ability to dynamically change resources (i.e. automated 
  install).

ProLiant 6500
- Updated the SYSMGMT.SYS to provide support for ProLiant 6500 Health 
  features.

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is a self-extracting
executable with a filename based on the SoftPaq Number above.

2. From that drive and directory, execute the downloaded file 
and follow the on-screen instructions to unpack the files.
The number of files to be created and total file size is displayed.
You will be given the chance to specify the target directory for 
the files, or default to the download directory.
The following files will be created:
       README.TXT
       NTSSD.EXE

3. After the files have been created, you may delete the  
self-extracting file downloaded in step 1.

4. From the directory in which the files are created, execute the 
self-extracting executable:
       NTSSD.EXE [ENTER]

5. Follow the instructions on the screen to extract (unzip) the support 
software files to a folder on your hard drive and run the program 
SETUP.EXE to install the software.

Copyright 1997, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.


PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home