SOFTPAQ NUMBER:  SP3543
PART NUMBER:  275718-001
FILE NAME:  N/A
TITLE:  ROMPaq for ProLiant 6000 
VERSION:  3.10 Rev A
LANGUAGE:  English

CATEGORY:  ROMPaqs

PRODUCTS AFFECTED: Compaq ProLiant 6000 Servers
NOTE:  For ProLiant 1000, 1500, 2000, 4000, 4500, and 5000 Servers, 
       use SoftPaq SP3541.
       For SystemPro/XL and Compaq ProSignia Servers, use SoftPaq SP3540.
       For ProLiant 800, 850R, and 2500 Servers, use SoftPaq SP3542.

OPERATING SYSTEM:  N/A

SYSTEM CONFIGURATION:  N/A

EFFECTIVE DATE:  30 May 1997

SUPERSEDES:  N/A

DESCRIPTION:  Creates the Systems ROMPaq Firmware Upgrade Diskette 
for Compaq ProLiant 6000 Servers, which provides an updated 
system ROM image.

Enhancements
------------
	ROM E20  ProLiant 6000 (05/16/97)
	==================================
	- Support paging on the US Robotics Sportster 28800.
	- Update to IRC version 1.34.

Fixes
-----
	ROM E20  ProLiant 6000 (05/16/97)
	==================================
	- Modified S.M.A.R.T. support with 6-byte MODE SENSE commands
	  that are required by some SCSI drives instead of the 10-byte
	  commands.
        - Comprehend a part change on the Compaq Wide Ultra-SCSI
	  Controller board and correctly detect and enable it as
	  a Compaq board.

HOW TO USE:

1.   Obtain a formatted 1.44 MB diskette.

2.   Download the SoftPaq to a directory on your hard drive
     and change to that directory. The file that is downloaded
     is SP3543.EXE.

3.   From that drive and directory, execute the SoftPaq
     file: SP3543 [ENTER]
     You will be prompted to place the formatted 1.44 MB diskette into 
     a diskette drive to create the diskette.

4.   After the diskette is created, you may delete the
     downloaded file SP3543.EXE if you wish.

5.   Refer to the README file(s) on the diskette for specific
     upgrade instructions and additional help.

Copyright 1997, Compaq Computer Corporation.  All rights
reserved.

Product names mentioned herein may be trademarks and/or
registered trademarks of their respective companies