| PaqPlace
For your Compaq |
Compaq SoftPaq Driver & Software Archive |
|
|
|
SP3500 — Deskpro 4000 S3 Display Support for Windows 95 VERSION 1.70 Rev A LANGUAGE Japanese PRODUCTS AFFECTED Deskpro 4000 Series with Compaq S3 ViRGE graphics controller, including models announced July 1997 NOTE To determine whether your unit has the video controller supported by this driver, refer to step 4 in the HOW TO USE section below. OPERATING SYSTEM Microsoft Windows 95
| SoftPaq Number |
SP3500 |
| Filename |
SP3500.EXE |
| Size |
397K |
| Date |
15 July 97 |
| Version |
N/A |
| Operating System |
All |
Readme
SOFTPAQ NUMBER: SP3500
PART NUMBER: N/A
FILE NAME: CPQDISP.DRV
TITLE: Deskpro 4000 S3 Display Support for Windows 95
VERSION: 1.70 Rev A
LANGUAGE: Japanese
CATEGORY: Drivers/Video
PRODUCTS AFFECTED: Deskpro 4000 Series with Compaq S3 ViRGE graphics
controller, including models announced July 1997
NOTE: To determine whether your unit has the video controller
supported by this driver, refer to step 4 in the HOW TO USE
section below.
OPERATING SYSTEM: Microsoft Windows 95
SYSTEM CONFIGURATION: Compaq S3 ViRGE PCI v1.70 graphics controller
EFFECTIVE DATE: July 1997
ELECTRONIC DISTRIBUTION ALLOWED: Yes
SUPERSEDES: N/A
DESCRIPTION: This SoftPaq unpacks the files required to install
the video driver for Windows 95 for the Compaq S3 ViRGE graphics
controller used in certain Deskpro 4000 models, including those
announced in July 1997.
HOW TO USE:
1. Download the SoftPaq to a temporary, empty directory on your
hard drive. The file downloaded is a self-extracting executable
with a filename based on the SoftPaq Number above.
2. From the download directory, execute the SoftPaq. When executed
with no parameters, files are extracted into the current directory.
To extract the files into a different directory, specify the complete
path of the directory as a parameter:
SPxxxx <path>
Enter "Y" to confirm and files are unpacked into the download
directory or the directory specified.
3. After the files have been created, you may delete the
self-extracting file downloaded in step 1.
4. To install the driver, go to the Control Panel and select:
Display/Settings/Change Display Type
Verify that the Adapter Type is Compaq S3 ViRGE.
If it is not, then Cancel and Exit.
If it is, then continue to select:
Change/Have Disk
Type in the path to the download directory or select "Browse" to
specify the location of the files extracted in step 2.
5. Select OK to install the driver.
6. After the driver has been installed, you may delete the files
from the download directory if you wish.
Copyright 1997, Compaq Computer Corporation. All rights reserved.
Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies
PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
|
Home
|