PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP3488

SP3488 — Deskpro 4000 S3 Display Support for Windows 95 VERSION 1.70 Rev A LANGUAGE German PRODUCTS AFFECTED Deskpro 4000 Series with Compaq S3 ViRGE graphics controller, including models announced July 1997 NOTE To determine whether your unit has the video controller supported by this driver, refer to step 4 in the HOW TO USE section below. OPERATING SYSTEM Microsoft Windows 95

SoftPaq Number SP3488
Filename SP3488.EXE
Size 397K
Date 15 July 97
Version N/A
Operating System All

  Download SP3488.EXE  


Readme

SOFTPAQ NUMBER:  SP3488
PART NUMBER:  N/A
FILE NAME:  CPQDISP.DRV
TITLE:  Deskpro 4000 S3 Display Support for Windows 95
VERSION:  1.70 Rev A
LANGUAGE:  German

CATEGORY:  Drivers/Video

PRODUCTS AFFECTED:  Deskpro 4000 Series with Compaq S3 ViRGE graphics 
                    controller, including models announced July 1997 
NOTE:  To determine whether your unit has the video controller
       supported by this driver, refer to step 4 in the HOW TO USE 
       section below.

OPERATING SYSTEM:  Microsoft Windows 95

SYSTEM CONFIGURATION:  Compaq S3 ViRGE PCI v1.70 graphics controller

EFFECTIVE DATE:  July 1997 

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SUPERSEDES:  N/A

DESCRIPTION:  This SoftPaq unpacks the files required to install 
the video driver for Windows 95 for the Compaq S3 ViRGE graphics 
controller used in certain Deskpro 4000 models, including those 
announced in July 1997.

HOW TO USE:

1. Download the SoftPaq to a temporary, empty directory on your 
hard drive.  The file downloaded is a self-extracting executable 
with a filename based on the SoftPaq Number above.

2. From the download directory, execute the SoftPaq.  When executed 
with no parameters, files are extracted into the current directory.
To extract the files into a different directory, specify the complete 
path of the directory as a parameter:

     SPxxxx <path> 

Enter "Y" to confirm and files are unpacked into the download 
directory or the directory specified.  

3. After the files have been created, you may delete the  
self-extracting file downloaded in step 1.

4. To install the driver, go to the Control Panel and select:

   Display/Settings/Change Display Type

Verify that the Adapter Type is Compaq S3 ViRGE. 
If it is not, then Cancel and Exit.
If it is, then continue to select:
    
   Change/Have Disk

Type in the path to the download directory or select "Browse" to 
specify the location of the files extracted in step 2.

5. Select OK to install the driver.

6. After the driver has been installed, you may delete the files 
from the download directory if you wish.

Copyright 1997, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies



PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home