SOFTPAQ NUMBER:  SP3429
PART NUMBER:  N/A
FILE NAME:  SP3429.EXE
TITLE:  Computer Setup/VP and PC Diagnostics 
VERSION:  1.70 Rev A for Computer Setup/VP
	  10.15c Rev C for PC Diagnostics 

LANGUAGE:  Japanese

CATEGORY:  Diagnostics/Setup

PRODUCTS AFFECTED: Deskpro 2000 MMX series

OPERATING SYSTEM: N/A

SYSTEM CONFIGURATION: N/A

EFFECTIVE DATE: 31 May 1997

ELECTRONIC DISTRIBUTION ALLOWED: Yes

SUPERSEDES: N/A

DESCRIPTION:
Creates four diskettes:
- Two (2) diskettes for Computer Setup/VP Version 1.70 Rev A 
- Two (2) diskette for Personal Computer Diagnostics Version 10.15c Rev C
These related utilities were formerly in two separate SoftPaqs.

Computer Setup and PC Diagnostics are both pre-installed on the 
Diagnostics Partition.  The diskettes in this SoftPaq can be used to 
update these utilities on the Diagnostics Partition or to restore them 
if the Diagnostics Partition has been destroyed.   Both utilities can be 
run by pressing F10 when the cursor moves to the upper right corner of 
the screen during power-up or reboot.  Or they can be run directly from 
these diskettes.  

Computer Setup allows the user to configure security and power 
management settings as well as system resources (DMA, IRQ, I/O Ports, 
and Memory).

Personal Computer Diagnostics contains programs that can test and 
inspect the state of the computer and its devices.  It is used with the 
Deskpro 2000 MMX Series, as well as other Compaq desktops and 
portables.

HOW TO USE:

1. Obtain four (4) formatted 1.44MB diskettes and place the first one 
in one of your diskette drives.

2. Download the SoftPaq to a directory on your hard drive and change to
that directory.  The file that is downloaded is SP3429.EXE.

3. Execute the SoftPaq file to create the three diskettes:  SP3429[ENTER]
You will be prompted to enter the additional diskettes.  
Label them as follows:
First Diskette -- Computer Setup/VP Version 1.70 Rev A (Disk 1 of 2)
Second Diskette -- Computer Setup/VP Version 1.70 Rev A (Disk 2 of 2)
Third Diskette -- Personal Computer Diagnostics Version 10.15c Rev C (Disk 1 of 2)
Fourth Diskette -- Personal Computer Diagnostics Version 10.15c Rev C (Disk 2 of 2)

4. After the diskettes are created, you may delete the downloaded file
SP3429.EXE if you wish.

5.  To install or upgrade Computer Setup/VP on the Diagnostics Partition, 
or to run it directly from the diskettes, power down your computer, place the 
first diskette created in Drive A:, power up your computer, and follow 
the on-screen menu.  If installing Computer Setup/VP to a new unpartitioned
hard drive, boot the Diagnostic diskette 3 first and then follow the prompts
to create a diagnostics partition.

6. To install or upgrade Personal Computer Diagnostics on the Diagnostics 
Partition, power down your computer, place the third diskette created in 
Drive A:, power up your computer.  From the "Manage Diagnostics Partition"
menu, select "Create" or "Update" partition and follow the prompts.

Copyright 1997, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies