SOFTPAQ NUMBER:  SP3311
PART NUMBER:  243119-451
FILE NAME:  N/A
TITLE:  Windows 95 Graphics Support for Compaq Computers
VERSION:  1.52 Rev C
LANGUAGE:  French

CATEGORY:  Drivers/Video

PRODUCTS AFFECTED: 
Supported computers include certain models in 
the following Compaq product lines:
Deskpro 2000 Series
Deskpro 4000 Series 
Deskpro 386/25e, 33, 33L
Deskpro 486/25, 33L, 50L
Deskpro 575, 590, 5100
Deskpro M Family
Deskpro XL Family
Deskpro XE Family
ProLinea Desktop Family
ProLinea e Family
Deskpro Minitower Family
Systempro
ProLiant 2000
NOTE:  To determine whether your computer has one of the graphics 
controllers supported by these drivers, select Start, Settings, 
Control Panel, Display, Settings, Change Display Type.  Check to see
if the graphics controller shown in the Adapter Type field matches 
one of  the graphics controllers mentioned in the Description field 
below.  

OPERATING SYSTEM:  Windows 95

SYSTEM CONFIGURATION:  Windows 95

EFFECTIVE DATE:  28 May 1997

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.X

SUPERSEDES:  SP2897

DESCRIPTION:  Creates the diskette "Display Driver Support for 
Microsoft Windows 95 on Cirrus Logic CL5434, CL5436, CL5446, and 
all Compaq QVision and AVGA Graphics Controllers."
This release supports all of the graphics controllers mentioned in 
the diskette title, except QVision 2000.  It supports multiple 
QVision 1024/I/E QVision and 1280/E/P controllers. 
Issues addressed in this release:
 - Corrects 640x480@85Hz timing for Cirrus Family to bring into
   ratified 85Hz VESA standard.

HOW TO USE:

1.  Obtain a formatted 1.44 MB diskette.

2.  Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is SP3311.EXE.

3.  From that drive and directory, execute the SoftPaq file:
SP3311 [ENTER]
You will be prompted to place the formatted 1.44 MB diskette into a 
diskette drive to create the diskette.

4.  After the diskette is created, you may delete the downloaded file 
SP3311.EXE if you wish.

5. To install the display drivers nsert the diskette in drive A:.
From the Windows 95 desktop, select Start, then Run, then enter the
command: A:\SETUP and press OK.

Copyright 1997, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered 
trademarks of their respective companies