PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP3263

SP3263 — Deskpro 2000 S3 Display Support for Windows 95 VERSION 1.60 Rev A LANGUAGE Danish PRODUCTS AFFECTED Deskpro 2000 Series with Compaq S3 V2 graphics controller, including models announced July 1997 and identified by Config Codes of BKxx or BNxx

SoftPaq Number SP3263
Filename SP3263.EXE
Size 340K
Date 23 July 97
Version N/A
Operating System All

  Download SP3263.EXE  


Readme

SOFTPAQ NUMBER:  SP3263
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Deskpro 2000 S3 Display Support for Windows 95
VERSION:  1.60 Rev A
LANGUAGE:  Danish

CATEGORY:  Drivers/Video

PRODUCTS AFFECTED:  Deskpro 2000 Series with Compaq S3 V2 graphics 
                    controller, including models announced July 1997 
                    and identified by Config Codes of BKxx or BNxx
NOTE:  To determine whether your unit has the video controller
       supported by this driver, refer to step 4 in the HOW TO USE 
       section below.

OPERATING SYSTEM:  Microsoft Windows 95

SYSTEM CONFIGURATION:  Compaq S3 V2 PCI v1.60 graphics controller

EFFECTIVE DATE:  July 1997 

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SUPERSEDES:  N/A

DESCRIPTION:  This SoftPaq unpacks the files required to install 
the video driver for Windows 95 for the Compaq S3 V2 graphics 
controller used in certain Deskpro 2000 models, including those 
announced in July 1997.

HOW TO USE:

1. Download the SoftPaq to a temporary, empty directory on your 
hard drive.  The file downloaded is a self-extracting executable 
with a filename based on the SoftPaq Number above.

2. From the download directory, execute the SoftPaq.  When executed 
with no parameters, files are extracted into the current directory.
To extract the files into a different directory, specify the complete 
path of the directory as a parameter:

     SPxxxx <path> 

Enter "Y" to confirm and files are unpacked into the download 
directory or the directory specified.  

3. After the files have been created, you may delete the  
self-extracting file downloaded in step 1.

4. To install the driver, go to the Control Panel and select:

   Display/Settings/Change Display Type

Verify that the Adapter Type is Compaq S3 V2 PCI v1.60 (S3). 
If it is not, then Cancel and Exit.
If it is, then continue to select:
    
   Change/Have Disk

Type in the path to the download directory or select "Browse" to 
specify the location of the files extracted in step 2.

5. Select OK to install the driver.

6. After the driver has been installed, you may delete the files 
from the download directory if you wish.

Copyright 1997, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies



PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home