| PaqPlace
For your Compaq |
Compaq SoftPaq Driver & Software Archive |
|
|
|
SP3244 — Compaq 288/336 Fax Modem Upgrade Kit VERSION 1.056 LANGUAGE English SUPERSEDES SP3102 Creates a set of three (3) diskettes that allow a user to upgrade the Compaq 288 PCMCIA Data/Fax Modem to a 33.6-Kbps modem that is managed properly by Windows 95.
| SoftPaq Number |
SP3244 |
| Filename |
SP3244.EXE |
| Size |
1701K |
| Date |
21 May 97 |
| Version |
N/A |
| Operating System |
All |
Readme
SOFTPAQ NUMBER: SP3244
PART NUMBER: 189659-001
FILE NAME: CPQ288P1.056
TITLE: Compaq 288/336 Fax Modem Upgrade Kit
VERSION: 1.056
LANGUAGE: English
CATEGORY: ROMPaqs
PRODUCTS AFFECTED: All Compaq notebooks that support the Compaq 288
PCMCIA Modem (includes Concerto, Contura Aero, LTE Elite, Contura 400
Family, and LTE 5000)
OPERATING SYSTEM: Microsoft Windows 95
SYSTEM CONFIGURATION: N/A
EFFECTIVE DATE: 16 May 1997
ELECTRONIC DISTRIBUTION ALLOWED: Yes
SUPERSEDES: SP3102
DESCRIPTION: Creates a set of three (3) diskettes that allow a
user to upgrade the Compaq 288 PCMCIA Data/Fax Modem to a 33.6-Kbps
modem that is managed properly by Windows 95.
Diskette 1: Compaq 336 Fax Modem (PCMCIA) Information
(updated INF file for Windows 95)
Diskette 2: Compaq Data/Fax 336 PCMCIA Modem ROM Upgrade
(same ROMPaq already released as SoftPaq SP2636)
Diskette 3: Compaq 336 Fax Modem Software, Part No. 189659-00
(upgrades Modem Advisor application for 33.6 Kbps)
Although the ROMPaq to perform this upgrade was previously released
as SoftPaq SP2636, without the updated INF file on the first
diskette created by this SoftPaq, Windows 95 does not report connect
speeds greater than 28.8 Kbps.
HOW TO USE:
1. Obtain 3 formatted 1.44-MB diskettes.
2. Download the SoftPaq to a directory on your hard drive and change
to that directory. The file that is downloaded is SP3244.EXE.
3. From that drive and directory, execute the SoftPaq file:
SP3244 [ENTER]
You will be prompted to place the formatted 1.44 MB diskettes into a
diskette drive to create the diskettes.
4. After the diskettes are created, you may delete the downloaded
file SP3244.EXE if you wish.
5. Refer to the README.TXT file on Diskette #1 for complete
installation instructions for all three diskettes.
6. Place Diskette #1 into drive a:. In Windows 95, select Start,
Run, then enter:
a:\install
Copyright 1997, Compaq Computer Corporation. All rights reserved.
Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies
PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
|
Home
|