| PaqPlace
For your Compaq |
Compaq SoftPaq Driver & Software Archive |
|
|
|
SP3191 — ProLiant 5000 OS/2 NDIS Driver for IBM PCI Token-Ring VERSION 1.11 LANGUAGE English
| SoftPaq Number |
SP3191 |
| Filename |
SP3191.EXE |
| Size |
77K |
| Date |
27 May 97 |
| Version |
N/A |
| Operating System |
All |
Readme
SOFTPAQ NUMBER: SP3191
PART NUMBER: N/A
FILE NAME: IBMTRP.OS2
TITLE: ProLiant 5000 OS/2 NDIS Driver for IBM PCI Token-Ring
VERSION: 1.11
LANGUAGE: English
CATEGORY: Drivers/Servers
PRODUCTS AFFECTED: Proliant 5000
OPERATING SYSTEM AND VERSION: OS/2 2.x or later
SYSTEM CONFIGURATION: IBM PCI Token-ring adapter
EFFECTIVE DATE: 8 May 1997
ELECTRONIC DISTRIBUTION ALLOWED: Yes
SUPERSEDES: N/A
DESCRIPTION: Contains an updated OS/2 NDIS driver, IBMTRP.OS2, for the
IBM PCI Token-ring adapter to correct an initialization problem when
booting OS/2 2.x or later on a Proliant 5000 server.
The error varies depending on which slot the Token-ring adapter is in,
but the message indicates that there is a problem opening the MAC driver.
Before the OS/2 Requester begins to load the following error may display:
LT00056: The Open Adapter Request To The IBMTRP_nif MAC Driver Did Not
Complete Within The Required Time Limit.
When the Requester attempts to load, one of the following messages may
appear:
Net 3087: Requester detected a problem with the cable connection.
Net 3060: The service did not respond to a control signal and was
stopped by the DosKillProc function.
HOW TO USE:
1. Download the SoftPaq to a directory on your hard drive and change to
that directory. The file that is downloaded is SP3191.EXE.
2. From that drive and directory, execute the SoftPaq file:
SP3191 [ENTER]
The following files should be created:
IBMTRP.OS2
IBMTRP.DOC
3. After the files are created, you may delete the downloaded file
SP3191.EXE if you wish.
4. To install the driver, make a backup copy of the existing IBMTRP.OS2
file in the \IBMCOM\MACS sub-directory on the hard drive and copy the
new IBMTRP.OS2 file to the \IBMCOM\MACS sub-directory.
5. Add the following switch to the IBMTRP.OS2 driver in the Config.Sys file:
/EOIDELAY=3
The line in the Config.Sys file should read:
DEVICE=C:\IBMCOM\MACS\IBMTRP.OS2 /EOIDELAY=3
6. Restart the server.
Copyright 1997, Compaq Computer Corporation. All rights reserved.
Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies
PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
|
Home
|