| PaqPlace
For your Compaq |
Compaq SoftPaq Driver & Software Archive |
|
|
|
SP3188 — Compaq EFS 2.14 for SCO UnixWare 2.1 VERSION 2.14 LANGUAGE English SUPERSEDES SP2864 This is a collection of device drivers to provide maximum performance with Compaq hardware. It also includes several utilities to monitor and increase the performance of your Compaq server.
| SoftPaq Number |
SP3188 |
| Filename |
SP3188.EXE |
| Size |
1279K |
| Date |
06 May 97 |
| Version |
N/A |
| Operating System |
All |
Readme
SOFTPAQ NUMBER: SP3188
PART NUMBER: N/A
FILE NAME: EFS214
TITLE: Compaq EFS 2.14 for SCO UnixWare 2.1
VERSION: 2.14
LANGUAGE: English
CATEGORY: Drivers/Servers
PRODUCTS AFFECTED: Compaq Server Product
OPERATING SYSTEM:
SCO UnixWare, Version 2.10
SCO UnixWare, Version 2.11
SYSTEM CONFIGURATION: N/A
EFFECTIVE DATE: 5 May 1997
ELECTRONIC DISTRIBUTION ALLOWED: Yes
SUPERSEDES: SP2864
DESCRIPTION: Creates four (4) diskettes containing the Compaq
Extended Feature Supplement 2.14 for SCO UnixWare 2.11. This is a
collection of device drivers to provide maximum performance with
Compaq hardware. It also includes several utilities to monitor
and increase the performance of your Compaq server.
CHANGES FROM EFS 2.13
o Support for The Compaq ProLiant 6000
o Support for The Compaq ProLiant 850R
o Support for The Compaq Smart-2/SL Drive Array Controller
DEVICE DRIVERS IN EFS 2.14
A device driver is software that the operating system uses to set up
and communicate with hardware devices. EFS 2.11 provides support for
the following Compaq specific hardware not supported in the base
operating system:
o Compaq Network Controller Support. The Compaq NetFlex Controller
(cet) driver supports the family of Compaq NetFlex controllers
under SCO UnixWare 2.10 and SCO UnixWare 2.11 operating systems.
o Compaq Netelligent Controller Support. The Compaq Netelligent
Controller (cet) driver supports the family of Compaq Netelligent
controllers under SCO UnixWare 2.10 and SCO UnixWare 2.11 operating
systems.
o Compaq SCSI-2 Support. Compaq SCSI-2 support includes drivers
for the Integrated 32-Bit Fast-SCSI-2 Controllers in the Compaq
ProSignia and Compaq ProLiant Family of Servers. Support is also
provided for the following options cards:
Compaq 32-Bit Fast-SCSI-2 Controller card
Compaq 32-Bit Fast-Wide SCSI-2/E Controller card
Compaq 32-Bit Fast-Wide SCSI-2/P Controller card
o Compaq Smart-2 /E Drive Array Controller.
o Compaq Smart-2 /P Drive Array Controller.
o Compaq Smart-2/SL Drive Array Controller
o ProLiant Storage System Support. The Compaq EFS 2.00b includes a
driver to support the features of the ProLiant Storage System
when connected to the Compaq 32-Bit Fast-SCSI-2 Controller or the
Compaq 32-Bit Fast-Wide SCSI-2 Controller.
o Compaq System Wellness Driver. System Wellness features include
hardware components that monitor system activity, temperature
conditions, fan operation, EISA bus utilization, and operation
system up time. It also provides Automatic Server Recovery and
Health Log Support for the Compaq SystemPro/XL, Compaq
ProLiant, and Compaq ProSignia Servers.
o Compaq Intelligent Drive Array support. Support is included for
the Compaq Intelligent Drive Array, Compaq IDA-Expansion, Compaq
IDA-2, Compaq SMART, Compaq SMART-2/E and Compaq SMART-2/P
controllers.
UTILITIES INCLUDED IN EFS 2.14
o SCSI-2 Management Utility. The SCSI-2 Management Utility
provides support for the Compaq 32-Bit Fast-SCSI-2 Controller,
the Compaq Integrated SCSI-2 Options Port, and the Compaq 6260
SCSI-2 Controller, and the Compaq TurboDAT Autoloader.
o Intelligent Drive Array (IDA) Diagnostic Utility. The
Intelligent Drive Array (IDA) Diagnostic Utility allows the
administrator to view Compaq Drive Array controller status.
o Compaq System Monitor Utility. The System Monitor utility
(cpqmon) displays system activity and performance information.
o Compaq UPS Support. The Uninterruptible Power Supply Utility
(UPS) will gracefully shutdown a server if the AC power fails.
o Disaster Recovery Utility. The Disaster Recovery Utility
creates a bootable Disaster Recovery diskette and a Disaster
Recovery tape. The diskette and tape are used to restore the
primary hard disk in the event of a failure.
o Compaq PageMarq Support. The PageMarq support includes the lp
model CPQPagemarq printer interface script which provides
support for the Compaq PageMarq printer. The cpqfax program
provides support for sending faxes through the Compaq PageMarq
printer.
o Compaq Single Launch Point Utility. The Single Launch Point
Utility allows execution of EFS utilities by selecting
them from a menu.
HOW TO USE:
1. Obtain four (4) DOS formatted 1.44 MB diskettes.
2. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is SP3188.EXE.
3. From that drive and directory, execute the SoftPaq file:
SP3188 [ENTER]
The following files will be created
QRST.EXE
EFS214._01
EFS214._02
EFS214._03
EFS214._04
README.TXT
4. After the files are created, you may delete the downloaded file SP3188.EXE if you wish.
5. Refer to README.TXT for instructions on creating the four (4)
diskettes and installing and using the software.
Copyright 1989,1997 Compaq Computer Corporation. All rights reserved.
Copyright 1991,1997 The Santa Cruz Operation. All Rights Reserved
Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.
PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
|
Home
|