SOFTPAQ NUMBER:  SP3178
PART NUMBER:  N/A
FILE NAME:  CPQBSSA.NLM
TITLE:  Fix Non-EISA-Based PCI Servers Running NetWare With CIM 3.20 
VERSION:  N/A
LANGUAGE:  English

CATEGORY:  Drivers/Servers

PRODUCTS AFFECTED:  Compaq non-EISA-based servers with PCI, 
such as Proliant 800 and Prosignia 200 

OPERATING SYSTEM:  Novell NetWare

SYSTEM CONFIGURATION:  Novell NetWare with 
Compaq Insight Manager (CIM) 3.20 Agents installed

PREREQUISITE:  CIM 3.20 Agents

EFFECTIVE DATE: 1 Apr 1997

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SUPERSEDES:  N/A

DESCRIPTION:  Contains the file CPQBSSA.NLM, which corrects the 
following problem on an affected server running Novell NetWare:
When attempting to reboot an affected server from the CIM console, 
the server shuts down properly but then locks up with a black 
screen.  A power cycle is necessary to recover the server.
This problem is only found on servers that are non-EISA-based PCI 
servers.  Support for those servers, specifically the Proliant 800 
and Prosignia 200, was added in the CIM 3.20 Agents.

HOW TO USE:

1.  Download the SoftPaq to a directory on your hard drive and
change to that directory.  The file that is downloaded is SP3178.EXE.

2.  From that drive and directory, execute the SoftPaq file:
SP3178 [ENTER]
The following files should be created:
CPQBSSA.NLM
CPQBSSA.DOC

3.  After the files are created, you may delete the downloaded
file SP3178.EXE if you wish.

4.  To install the fix, replace the file CPQBSSA.NLM on the server 
with the copy of CPQBSSA.NLM in this SoftPaq, and then shut down and 
restart the server.

Copyright 1997, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies