| PaqPlace
For your Compaq |
Compaq SoftPaq Driver & Software Archive |
|
|
|
SP3163 — Upgrade Compaq SCSI Tape Driver for NetWare VERSION 1.19 LANGUAGE English
| SoftPaq Number |
SP3163 |
| Filename |
SP3163.EXE |
| Size |
57K |
| Date |
09 May 97 |
| Version |
N/A |
| Operating System |
All |
Readme
SOFTPAQ NUMBER: SP3163
PART NUMBER: N/A
FILE NAME: CPQSTAPE.DSK
TITLE: Upgrade Compaq SCSI Tape Driver for NetWare
VERSION: 1.19
LANGUAGE: English
CATEGORY: Drivers/Servers
PRODUCTS AFFECTED: Compaq servers
OPERATING SYSTEM: Novell NetWare 3.x or 4.x
SYSTEM CONFIGURATION:
- SBACKUP.NLM and SMSDI.NLM Version 4.04d or later (with SBACK6)
from Novell
- CPQSTAPE Version 1.18 or earlier from Novell Software Support
Diskettes (NSSD) from Compaq
EFFECTIVE DATE: 28 April 1997
ELECTRONIC DISTRIBUTION ALLOWED: Yes
SUPERSEDES: N/A
DESCRIPTION: Contains version 1.19 of the Compaq SCSI Tape Driver
for NetWare (CPQSTAPE.DSK). Use this version of the driver, along
with SBACKUP.NLM and SMSDI.NLM Version 4.04d or later (with SBACK6),
to perform multiple backup sessions on a single tape, and to restore
any of those backup sessions.
IMPORTANT: Version 1.19 of CPQSTAPE.DSK cannot recognize or restore
any backup session other than the initial session if the backup
sessions were created with CPQSTAPE.DSK Version 1.18 or earlier.
HOW TO USE:
1. Download the SoftPaq to a directory on your hard drive and change
to that directory. The file that is downloaded is SP3163.EXE.
2. From that drive and directory, execute the SoftPaq file:
SP3163 [ENTER]
The following files should be created:
CPQSTAPE.DSK
CPQSTAPE.DOC
3. After the files are created, you may delete the downloaded file
SP3163.EXE if you wish.
4. From a client PC, log in to the server with ADMINISTRATOR rights.
5. Map an unused drive letter (for example F:) to the SYS:\ volume
root directory.
6. Enter the following command to copy CPQSTAPE.DSK Ver 1.19 to the
server:
COPY drive:\sudirectory\CPQSTAPE.DSK F:\SYSTEM
7. From the NetWare server prompt enter:
UNLOAD CPQSTAPE
If CPQSTAPE.DSK was previously loaded, a message that it was
unloaded should appear.
8. Enter:
LOAD CPQSTAPE
Verify from the message displayed that the version is now 1.19.
Copyright 1997, Compaq Computer Corporation. All rights reserved.
Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies
PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
|
Home
|