SOFTPAQ NUMBER: SP3082
PART NUMBER: 276816-001,276817-001
FILE NAME: N/A
TITLE: Peripheral Adapter Support Software for VINES 6.x, 7.x and 8.x
VERSION: 3.00
LANGUAGE: English

CATEGORY: Drivers\Servers

PRODUCTS AFFECTED: All Compaq Server products 

OPERATING SYSTEM: Banyan VINES 6.x, 7.x and 8.x

SYSTEM CONFIGURATION: N/A

EFFECTIVE DATE: March 26, 1998

ELECTRONIC DISTRIBUTION ALLOWED: Yes

SUPERSEDES: SP2718

DESCRIPTION:
    The Peripheral Adapter Support Software for VINES is a collection
    of VINES 6.x, 7.x & 8.x software components which provide support
    for Compaq Servers and Options.

CHANGES FROM PREVIOUS RELEASE
    
Rev 1.00 : Compaq Fibre Channel Controller driver
	   Supports Compaq Fibre Channel (EISA / PCI) controllers
	   Supports events notifications
	   on VINES 6.x, 7.x & 8.x platforms.

   1) Rev 1.00 : Compaq  Fibre  Channel  Host  Controller supplement
		 Driver.
		 Provides  Additional  Support  required  for Compaq
                 Fibre Channel (EISA / PCI) Controllers on ISA / PCI
		 Systems.
	
Rev 2.05 : Compaq SMART-2 (EISA / PCI) Array Controller driver
	   Enhanced  to  support  logging  of  events for Drive Array
	   Subsystem on VINES 6.00, 6.20 & above,7.x & 8.x platforms.
           Fixed Problem in reporting disk usage statistics.

Rev 1.01 : Compaq System Management Utility(cpqsm)
	   Enhanced  to support Integrated Management Log Viewing on
	   VINES 6.x, 7.x & 8.x platforms.
	  
Rev 1.05 : Compaq  SMART-2  and  Fibre Channel Configuration Display
	   Utility.
           On-line  utility  to  display  SMART-2  and Fibre Channel
           Array family of controller information for Logical drives.
 
Rev 1.02 : IDA Agent.
           Corrected  Mail  Alert  Notification  Problem  on SMART-2
	   Controller.

2.0 SOFTWARE COMPONENTS 

    The software components contained in the SSD are device drivers
    and support  utilities.  A  device driver is  software that the
    operating system uses to  set up and  communicate with hardware
    devices.  The following list identifies each driver and utility
    contained  on the SSD  as well as  the Compaq specific hardware
    which it supports:

Drivers and controllers supported:

Rev 1.00 : Compaq Fibre Channel Controller driver
	   Supports Compaq Fibre Channel (EISA / PCI) controllers
	   Supports events notifications
	   on VINES 6.x, 7.x & 8.x platforms.

 1) Rev 1.00 : Compaq  Fibre  Channel  Host  Controller supplement
	       Driver.
	       Provides  Additional  Support  required  for Compaq 
               Fibre Channel (EISA / PCI) Controllers on ISA / PCI
	       Systems.

Rev 1.01 : Remote Insight Board Driver for Banyan VINES 6.20(0) and
	   above.

Rev 2.05 : Compaq SMART-2 (EISA / PCI) Array Controller driver
	   Supports Compaq SMART-2 (PCI/EISA) controllers
	   Supports Compaq SMART-2/SL controllers
	   Supports Compaq SMART-2/DH controllers
	   Supports logging of events for Drive Array Subsystem on
	   VINES 6.00, 6.20 & above,  7.x & 8.x platforms.
		
   1) Rev 1.02 : Compaq  Additional  Support  for  SMART-2   Array 
	         controller  driver  on  VINES  6.x,  7.x  &   8.x
	         platforms.

Rev 1.20 : Compaq Fast-Wide and Wide-Ultra controller driver
	   Supports  Integrated Compaq 32-Bit Fast-Wide SCSI-2 and
	   add-on (EISA / PCI) controllers
	   Supports  Integrated  Compaq Wide-Ultra SCSI and add-on
	   (PCI) controllers
	   Supports  Integrated  Compaq   Dual  Channel Wide-Ultra
	   SCSI-3 and add-on (PCI) controllers
	   Supports logging of events for SCSI Subsystem on  VINES
	   6.x, 7.x & 8.x platforms.
 
  1) Rev 1.00 : Compaq  Supplemental  Fast-Wide  and    Wide-Ultra
                controller  Driver  on   VINES   6.x,  7.x  &  8.x
                platforms.

Rev 1.20 : Compaq Enhanced IDE controller driver
	   Supports  IDE/EIDE hard drives and EIDE CD-ROM on VINES
	   6.x, 7.x & 8.x platforms.

Rev 2.02 : Compaq Wellness driver 
	   Supports server health monitoring features on VINES 6.x
	   platforms.

Rev 3.00 : Compaq Wellness driver
	   Supports  server  health  monitoring  features on VINES
	   7.x & 8.x platforms.

Rev 1.00 : Compaq Integrated Management Log driver
	   Supports logging of events that occur in a system or its
	   components.

Rev 1.00 : Banyan IDA,  IDA-2,  IAES  & SMART SCSI Array controller
	   driver.

Utilities provided in this SSD :

    1) Rev 1.01 : RI Agent.
       This  runs  as  a daemon and interacts with the RIB Driver,
       Health  and  IDA  Agents  to  send SNMP Traps to the Remote
       Insight   Board.  Additional   executable  of  RI  Agent is
       included which is  compatible  with  Wellness  driver  v1.0
   
    2) Rev 1.02 : Health Agent.
       This runs  as  a daemon and monitors the Correctable Memory
       Errors, counts  and  informs  the  RI Agent to send an SNMP
       Trap  whenever a  Correctable   Memory  Error occurs.  This
       agent  interacts  with   Wellness   driver   and   supports
       monitoring   of  various  server components and sends  Mail
       Alert   notification  whenever  a status change is detected
       on  any of the  server  components.  This   feature will be
       available only if the Compaq Wellness  driver  version 2.00
       or above is installed in your system.

       Additional  executable  for Health  Agent is included which
       is compatible with Wellness driver version 1.0

    3) Rev 1.02 : IDA Agent.
       This  runs as a daemon and monitors the status of the Drive
       Array configured on  the server. It informs the RI Agent to
       send an SNMP Trap in case there is any change in the status
       of  the  logical,   physical and  spare drives.  This agent
       interacts with IDA  driver and SMART-2 driver and  supports
       monitoring  of drives   connected to IDA or  Compaq SMART-2
       Array  controller  and  sends Mail  Alert notification if a
       drive status change is detected.

    4) Rev 1.0 :  RIVIEW. 
       This is  a  curses  based utility which  allows the user to
       monitor  the  Drive Array and  Correctable Memory status on
       the server.

    5) Rev 1.0 :  RICONFIG.
       This  is a  curses based  utility which  allows the user to
       view and on-line configure the Remote Insight Board.

    6) Rev 1.05 : Compaq SMART-2  and  Fibre Channel Configuration
       Display Utility.
       On-line utility to display SMART-2 and Fibre Channel  Array
       family of  controller information for Logical drives.
       Run  'cpqs2' at Unix prompt. "cpqs2 -h" gives the available
       options for the utility.
							   
    7) Rev 1.01 : Compaq System Management Utility.
       Server based utilities which support :
       Notification of network, storage and system health  failure
       events through Mail alerting mechanism.
       Dynamic enable/disable of driver debug messages.
       Menu option to launch existing utilities -
       cpqs2, cpqnet, riview, riconfig
       View  critical/correctable error log
       View/Save cpqnetlog and cpqs2 output
       View   Integrated   Management   Log
	       
		   
       To launch Compaq System Management Utility, run 'cpqsm'  at
       Unix prompt.

       NOTE : The  version  of 'cpqnetlog'  contained on "Ver 2.04
	      LAN Adapter  Support Software for VINES 6.0 and 7.0"
	      or  above  diskette   is   required to  produce mail
	      alerting for Redundant   Backup  Pair and Standalone
	      network  interface   controller  failure/recoveries.
	      For  supported   controller  names  please  refer to
	      README.RBP  file available  on  LAN  Adapter Support
	      Software  for  VINES 6.0   and   7.0,  Documentation 
	      Diskette.

  
HOW TO USE:

1. Obtain two formatted 1.44 MB diskettes.

2. Download  the  SoftPaq  to  a directory on your hard drive and
   change to that directory.  The  file  that  is  downloaded  is
   SP3082.EXE.

3. From that drive and directory, execute the SoftPaq file:
   SP3082 [ENTER]
   The following files should be created:
   276816US._01
   276816US._02
   QRST5.EXE
   SP3082.TXT

4. To create the diskettes, at the DOS prompt run :
   QRST5 [ENTER]
   Follow the on-screen instructions, which prompt  you  when to
   insert  the  DOS  formatted  diskettes and allow you to print
   labels.

5. After the SSD diskettes  are  created,  you  may  delete  the
   downloaded file SP3082.EXE  and the other files it creates on
   the download directory if you wish.

6. Insert the documentation diskette(the second  diskette)  into
   drive A  and  perform  one  of  the  following  to  view  the
   installation instructions :
   From DOS prompt enter "a:\readme"
				or
   Boot the system with the diskette in the drive A:

Copyright 1998, Compaq Computer Corporation. All rights reserved.

Product  names  mentioned  herein   may  be  trademarks   and/or
registered trademarks of their respective companies.