SOFTPAQ SOLUTION:  SP3064
PART NUMBER:  275289-002, 275290-002, 275291-002, 275292-002
FILE NAME:  N/A
TITLE:  Compaq System Configuration Utility
VERSION:  2.34 Rev A
LANGUAGE:  English

CATEGORY:  Diagnostics/Setup

PRODUCTS AFFECTED:  
ProSignia, ProSignia VS, ProSignia 200, ProSignia 300, ProSignia 500;
Systempro, Systempro/E, Systempro/LT, Systempro/XL;
Deskpro/L Family, Deskpro/M Family, Deskpro/XL Family; 
Portable 486;
ProLiant 800, ProLiant 1000, ProLiant 1500, ProLiant 2500, 
ProLiant 2000/4000, ProLiant 4500, ProLiant 5000, ProLiant 6000, 
Rack-Mountable ProLiant Servers 

OPERATING SYSTEM:  N/A

SYSTEM CONFIGURATION:  N/A

EFFECTIVE DATE:  April 15, 1997

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SUPERSEDES:  SP2881

DESCRIPTION:  Creates the four System Configuration For Compaq EISA and 
EISA/PCI Products diskettes, which support all currently shipping 
Systems Division server products. It is installed on the System 
Partition for those systems which support it and have hard drives. It 
is shipped as diskette(s) on all other products.

New Features:
1. Includes support for Compaq ProLiant 850R and ProLiant 6000
   servers.
2. Includes support for the Compaq Smart-2SL Array Controller.
3. Adds support for the Citrix WinFrame 1.6 Operating System.
4. Optimizes the PCI IRQ sharing rules to avoid having 
   Mass Storage Device Controllers and Network Interface Cards 
   share interrupts.

Problems Fixed:
1. This version of the System Configuration Utility (SCU) must be used
   when adding the memory expansion board to a ProLiant 2000, 4000, or
   4500 that was previously configured with version 2.32A or later
   of the SCU without the memory expansion board installed. 
   NOTE: Using any version of the System Configuration Utility prior 
         to 2.34A will result in an unsuccessful hardware upgrade.
2. If a year of 2000 or greater was entered when prompted by 
   the System Configuration Utility, the utility would 
   continue to prompt for the date each time it was invoked.  
   This has been corrected.
3. If values are entered for the Compaq Integrated Management Display
   during a SmartStart Assisted Path Installation, then the 
   System Configuration would truncate the last character of 
   multi-line entries.  This has been corrected.

HOW TO USE

1. Download the SoftPaq to a directory on your hard drive and change to
that directory.  The file downloaded to your hard drive is SP3064.EXE.

2. Obtain four (4) formatted 1.44MB diskette and place a diskette in 
one of your diskette drives.

3. Execute the SoftPaq file to create the diskettes:  SP3064 [ENTER]  
You will be prompted to enter the remaining diskettes when needed.

4. After the diskettes are created, you may delete the downloaded file
SP3064.EXE if you wish.

5. To run the Compaq System Configuration Utility, power down your 
computer, place the Compaq System Configuration Utility diskette 1 in 
Drive A:, and power up your computer.

Copyright 1995,1997 Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered 
trademarks of their respective companies