| PaqPlace
For your Compaq |
Compaq SoftPaq Driver & Software Archive |
|
|
|
SP2891 — Deskpro Windows NT Filter Driver for LS-120 VERSION 1.00 Rev A LANGUAGE English
| SoftPaq Number |
SP2891 |
| Filename |
SP2891.EXE |
| Size |
396K |
| Date |
28 February 97 |
| Version |
N/A |
| Operating System |
All |
Readme
SOFTPAQ NUMBER: SP2891
PART NUMBER: N/A
FILE NAME: SETUP.EXE
TITLE: Deskpro Windows NT Filter Driver for LS-120
VERSION: 1.00 Rev A
LANGUAGE: English
CATEGORY: Desktops\Drivers
PRODUCTS AFFECTED: Any Deskpro with standard or optional LS-120
Drive, including Deskpro 2000/4000/6000 Series
OPERATING SYSTEM: Microsoft Windows NT 3.51 Service Pack 5;
Windows NT 4.0
NOTE: This LS-120 filter driver is not supported on Window NT 3.51
Service Pack 4 and below. To install it on Windows NT 3.51, you
must upgrade to Service Pack 5.
SYSTEM CONFIGURATION: N/A
EFFECTIVE DATE: 24 February 1997
ELECTRONIC DISTRIBUTION ALLOWED: Yes
SOFTPAQ UTILITY VERSION: 3.x
SUPERSEDES: N/A
DESCRIPTION: Contains installation files for an updated Windows
NT driver for an LS-120 drive installed in any of the Deskpro
computers mentioned above. The LS-120 drive, which may be standard
or optional equipment, is a 3.5-inch diskette drive that uses
diskettes capable of storing up to 120-MB.
This updated driver corrects problems caused by the original
Windows NT LS-120 driver. The installation process requires
1.1 MB of free hard drive space. If the installation files are
then deleted, the driver takes up just 13 KB of hard drive space.
HOW TO USE:
1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename
based on the Softpaq number above.
2. Execute the downloaded file and follow the on-screen instructions.
Entering "Y" to confirm the unpacking of files creates a new directory
folder in the downloaded directory. All files are unpacked into this
newly created directory.
3. After the directory has been created, you may delete the
self-extracting file downloaded in step 1.
4. To install, execute SETUP.EXE in the created directory and
follow on-screen instructions.
5. After installation is complete, you may delete the directory
created in step 2 if you wish.
Copyright 1997, Compaq Computer Corporation. All rights reserved.
Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies
PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
|
Home
|