SOFTPAQ NUMBER:  SP2862
PART NUMBER:  N/A
FILE NAME:  EFS311
TITLE:  Compaq EFS 3.11 for SCO Open Server Release 3
VERSION:  3.11
LANGUAGE: English

CATEGORY:  Drivers/Servers

PRODUCTS AFFECTED: Any Compaq Server Products

OPERATING SYSTEM:  

SCO UNIX System V/386 Release 3.2 Version 4.0 
    with Maintenance Supplement 4.2
SCO Open Desktop or SCO Open Desktop Lite, Release 3.0
SCO Open Server Enterprise 3.0
SCO Open Server Network 3.0
SCO MPX Release 3.0

SYSTEM CONFIGURATION:  Any Compaq system running one of the above 
operating systems.

EFFECTIVE DATE: January 20, 1997

ELECTRONIC DISTRIBUTION ALLOWED: Yes

SUPERSEDES:  SP2360

DESCRIPTION:
Creates the five (5) diskettes of Compaq Extended Feature Supplement 
(EFS) 3.11 for SCO Open Server Release 3, a collection of device 
drivers to provide maximum performance with Compaq hardware, and also 
utilities to monitor the performance of your Compaq server.  
The EFS functionality provided in this SoftPaq is included in the 
SmartStart installation.  If you are not using SmartStart, use this 
SoftPaq to install EFS 3.11 with SCO Open Server Release 3.

       Changes From EFS 3.10

o  NetFlex driver ported to MDI
o  NetFlex 3 Fiber driver support

       Device Drivers Included in EFS 3.11

o  Compaq NetFlex Controller Support.
o  Compaq Netelligent Controller Support.
o  Compaq SCSI-2 Support.
	o  Compaq 32-Bit Fast-SCSI-2 Controller Card.
	o  Compaq 32-Bit Fast-Wide SCSI - 2/ E Controller Card.
	o  Compaq 32-Bit Fast-Wide SCSI - 2/ P Controller Card.
o  Compaq Smart-2 /E Drive Array Support.
o  Compaq Smart -2 /P Drive Array Support.
o  Compaq System Wellness Driver.
o  Compaq Intelligent Drive Array Support.
o  Boot-Time Loadable Drivers.

     Utilities Included in EFS 3.11

o  SCSI-2 Management Utility.
o  Intelligent Drive Array (IDA) Diagnostic Utility.
o  Compaq System Monitor Utility.
o  Compaq UPS Support.
o  Compaq Pagemarq Support.
o  Compaq Single Launch Point Utility.

HOW TO USE:

1.  Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is SP2862.EXE

2.  From that drive and directory, execute the SoftPaq file:
SP2862 [ENTER]
The following files should be created:
QRST.EXE
EFS311._01
EFS311._02
EFS311._03
EFS311._04
EFS311._05
README.TXT

3.  After the files are created, you may delete the downloaded file 
SP2862.EXE if you wish.

4.  Refer to README.TXT for instructions on creating the five (5) 
diskettes.

Copyright 1989,1997, Compaq Computer Corporation.  All rights reserved.
Copyright 1991,1997, The Santa Cruz Operation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies