SOFTPAQ NUMBER:  SP2724
PART NUMBER:  N/A
FILE NAME:  CPQFTN.SYS
TITLE:  Compaq Fault Tolerant Network Support for OS/2
VERSION:  2.20 Rev A
LANGUAGE:  English

CATEGORY:  Systems/Drivers

PRODUCTS AFFECTED:  ProLiant 6500
                    ProLiant 6000
                    ProLiant 5000
                    ProLiant 4500
                    ProLiant 4000
                    ProLiant 2500
                    ProLiant 2000
                    ProLiant 1500
                    ProLiant 1000
                    ProLiant 800
                    ProSignia 500
                    ProSignia 300
                    ProSignia 200
                    ProSignia VS
                    ProSignia

OPERATING SYSTEM :       
	IBM OS/2 v2.x 
	IBM OS/2 Warp v3.0
	IBM OS/2 Warp Connect 3.0
	IBM OS/2 for SMP v2.11
	IBM OS/2 Warp 4.0
	IBM OS/2 Warp Server 4.0
	IBM OS/2 Warp Server Advanced 4.0
	IBM OS/2 Warp Server Advanced with SMP 4.0

SYSTEM CONFIGURATION:    
Supports the following network adapters from Compaq: 
        NetFlex-3/E with 10 Base-T, 100 TX or 100 Anylan VG modules 
        NetFlex-3/P with 10Base-T, 100 TX or 100 Anylan VG modules
        Netelligent 10 T PCI UTP
        Netelligent 10/100 TX PCI UTP
        Netelligent 10 T/2 UTP/BNC PCI 
        Netelligent embedded controllers on Compaq Servers listed above

EFFECTIVE DATE: 29 July 1997

ELECTRONIC DISTRIBUTION ALLOWED: Yes

SOFTPAQ UTILITY VERSION: 2.x

SUPERSEDES: SP2064

DESCRIPTION:  Creates an OS/2 support diskette containing the Compaq Fault 
Tolerant Network Driver and the Advanced Network Control Utility.  Network 
Fault Tolerance is achieved by configuring a redundant network controller.
This driver and utility allow the user to establish a backup relationship 
between any two of the controllers listed in the System Configuration section 
above. The only exception is that a NetFlex-3 controller with a 100 Anylan VG 
module can only be paired with another NetFlex-3 controller with a 100 Anylan
VG module. 

       Updates:
                
       - Adds fault tolerant support for:
         - ProSignia 200, ProLiant 800, ProLiant 2500, ProLiant 6000, and 
           ProLiant 6500 
         - Netelligent 10 T PCI UTP, Netelligent 10/100 TX PCI UTP,
           Netelligent Dual 10/100 TX PCI UTP, Netelligent 10 T/2 UTP/BNC PCI, 
           and embedded controllers on the Compaq Servers listed above
         - StandAlone controllers
         - Full Duplex mode of operation
                    
       - Enhances CIM Agents support

       - Implements System Event Logging

       - Enhances the online utility to support the new features
	
HOW TO USE:  
           
       1. Download the Softpaq to an empty directory on your 
          hard drive and change to that directory. The file that 
          is downloaded is SP2724.EXE.
			
       2. From that drive and directory, execute the Softpaq file :        
           SP2724[ENTER]
          The following files should be created:
           QRST5.EXE
           CPQFTN._01
           SP2724.DOC

       3. Obtain a formatted 1.44 MB diskette.

       4. To create a diskette, run QRST5 and follow the on-screen
          instructions.
			
       5. After the diskette is created, you may delete the downloaded
          file SP2724.EXE and the other files created on your hard drive
          if you wish.

       6. Refer to README.TXT on the diskette for installation instructions
          and additional information.

Copyright 1997, Compaq Computer Corporation. All rights reserved.

Product names mentioned herein may be trademarks and/or registered trademarks of
their respective companies.