| PaqPlace
For your Compaq |
Compaq SoftPaq Driver & Software Archive |
|
|
|
SP2718 — Peripheral Adapter Support Software for VINES 6.0 and 7.0
| SoftPaq Number |
SP2718 |
| Filename |
SP2718.EXE |
| Size |
1243K |
| Date |
08 October 97 |
| Version |
2.07 |
| Operating System |
Banyan VINES |
| Products Affected |
Compaq Servers |
| Supersedes |
SP2716 |
Readme
SOFTPAQ NUMBER: SP2718
PART NUMBER: 275567-008
FILE NAME: N/A
TITLE: Peripheral Adapter Support Software for VINES 6.x and 7.x
VERSION: 2.07
LANGUAGE: English
CATEGORY: Drivers\Servers
PRODUCTS AFFECTED: All Compaq Server products
OPERATING SYSTEM: Banyan VINES 6.x and 7.x
SYSTEM CONFIGURATION: N/A
EFFECTIVE DATE: January 15th, 1998
ELECTRONIC DISTRIBUTION ALLOWED: Yes
SUPERSEDES: SP2716
DESCRIPTION:
The Peripheral Adapter Support Software Diskette(SSD) is a collection
of VINES 6.x and 7.x software components which provide support
for Compaq products other than Network Interface Controllers.
Software Components :
Rev 1.01: Remote Insight Board Driver for Banyan VINES 6.20(0)
and above.
Rev 2.04: Compaq SMART-2 (EISA / PCI) Array Controller driver
Supports Compaq SMART-2 (PCI/EISA) controllers.
Supports Compaq SMART-2/SL controllers.
Supports Compaq SMART-2/DH controllers.
Supports logging of events for Drive Array Subsystem.
Rev 1.02: Compaq Additional Support for SMART-2 Array
controller driver
Rev 1.20: Compaq Fast-Wide and Wide-Ultra controller driver
Supports Integrated Compaq 32-Bit Fast-Wide SCSI-2 and
add-on (EISA / PCI) controllers.
Supports Integrated Compaq Wide-Ultra SCSI and add-on (PCI)
controllers.
Supports Integrated Compaq Dual Channel Wide-Ultra SCSI-3
and add-on (PCI) controllers.
Supports logging of events for SCSI Subsystem.
Rev 1.00: Compaq Supplemental Fast-Wide and Wide-Ultra
controller Driver
Rev 1.20: Compaq Enhanced IDE controller driver
Supports IDE/EIDE hard drives and EIDE CD-ROM
Rev 2.02: Compaq Wellness driver
Supports server health monitoring features on VINES 6.x
platforms
Rev 3.00: Compaq Wellness driver
Supports server health monitoring features on VINES 7.x
platforms
Rev 1.00: Compaq Integrated Management Log driver
Supports logging of events that occur in a system or its
components.
Rev 1.00: Banyan IDA, IDA-2, IAES & SMART SCSI Array controller
driver
Utilities provided in this SSD :
1) Rev 1.01: RI Agent.
This runs as a daemon and interacts with the RIB Driver,
Health and IDA Agents to send SNMP Traps to the Remote
Insight Board. Additional executable of RI Agent is
included which is compatible with Wellness driver v1.0
2) Rev 1.02: Health Agent.
This runs as a daemon and monitors the Correctable Memory
Errors, counts and informs the RI Agent to send an SNMP
Trap whenever a Correctable Memory Error occurs. This agent
interacts with Wellness driver and supports monitoring of
various server components and sends Mail Alert notification
whenever a status change is detected on any of the server
components. This feature will be available only if the Compaq
Wellness driver version 2.00 or above is installed in your
system.
Additional executable for Health Agent is included which is
compatible with Wellness driver version 1.0
3) Rev 1.01: IDA Agent.
This runs as a daemon and monitors the status of the Drive
Array configured on the server. It informs the RI Agent to
send an SNMP Trap in case there is any change in the status
of the logical, physical and spare drives. This agent interacts
with IDA driver and SMART-2 driver and supports monitoring of
drives connected to IDA or Compaq SMART-2 Array controller and
sends Mail Alert notification if a drive status change is
detected.
4) Rev 1.0: RIVIEW.
This is a curses based utility which allows the user to
monitor the Drive Array and Correctable Memory status on
the server.
5) Rev 1.0: RICONFIG.
This is a curses based utility which allows the user to
view and on-line configure the Remote Insight Board.
6) Rev 1.04: Compaq SMART-2 Configuration Display Utility
On-line utility to display SMART-2 Array family of controller
information for Logical drives.
Run 'cpqs2' at Unix prompt. "cpqs2 -h" gives the available
options for the utility.
7) Rev 1.00: Compaq System Management Utility.
Server based utilities which support :
Notification of network, storage and system health
failure events through Mail alerting mechanism.
Dynamic enable/disable of driver debug messages.
Menu option to launch existing utilities -
cpqs2, cpqnet, riview, riconfig
View critical/correctable error log
View/Save cpqnetlog and cpqs2 output
To launch Compaq System Management Utility, run 'cpqsm'
at Unix prompt.
NOTE: The version of 'cpqnetlog' contained on "Ver 2.04
LAN Adapter Support Software for VINES 6.x and 7.x"
or above diskette is required to produce mail
alerting for Redundant Backup Pair and Standalone
network interface controller failure/recoveries. For
supported controller names please refer to README.RBP
file available on LAN Adapter Support Software for
VINES 6.x and 7.x, Documentation Diskette.
HOW TO USE:
1. Obtain two formatted 1.44 MB diskettes.
2. Download the SoftPaq to a directory on your hard drive and
change to that directory. The file that is downloaded is
SP2718.EXE.
3. From that drive and directory, execute the SoftPaq file:
SP2718 [ENTER]
The following files should be created:
275567US._01
275567US._02
QRST5.EXE
SP2718.TXT
4. To create the diskettes, at the DOS prompt run :
QRST5 [ENTER]
Follow the on-screen instructions, which prompt you when to
insert the DOS formatted diskettes and allow you to print labels.
5. After the SSD diskettes are created, you may delete the downloaded
file SP2718.EXE and the other files it creates on the download
directory if you wish.
6. Insert the documentation diskette(the second diskette) into drive
A and perform one of the following to view the installation
instructions :
From DOS prompt enter "a:\readme"
or
Boot the system with the diskette in the drive A:
Copyright 1998, Compaq Computer Corporation. All rights reserved.
Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.
PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
|
Home
|