PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP2633

SP2633 — Upgrade Compaq Insight Storage Subsystem Agent for NetWare VERSION 3.20 LANGUAGE English

SoftPaq Number SP2633
Filename SP2633.EXE
Size 74K
Date 29 April 97
Version N/A
Operating System All

  Download SP2633.EXE  


Readme

SOFTPAQ NUMBER:  SP2633
PART NUMBER:  N/A
FILE NAME:  CPQDSKSA.NLM
TITLE:  Upgrade Compaq Insight Storage Subsystem Agent for NetWare
VERSION:  3.20
LANGUAGE:  English

CATEGORY:  Software Solution/Servers

PRODUCTS AFFECTED:  Any Compaq server with system configuration below

OPERATING SYSTEM:  Novell NetWare 3.x or 4.x

SYSTEM CONFIGURATION:  Novell NetWare 3.x or 4.x and Version 2.61, 3.00,
or 3.10 of the Compaq Insight Storage Subsystem Agent for NetWare.  The
server must also have a SMART controller installed with a fault tolerant
logical drive and an online spare drive.

EFFECTIVE DATE:  04 Dec 1996

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SUPERSEDES:  N/A

DESCRIPTION:  Contains the file CPQDSKSA.NLM necessary to upgrade to
Version 3.20 of the Compaq Insight Storage Subsystem Agent for NetWare.
This corrects a situation where Compaq Insight Manager does not display
an on-line spare hard drive when it is present.  There is no actual loss
of a spare drive as far as the SMART controller is concerned.  This
upgrade simply allows it to be properly displayed.  This problem has
only been seen on SMART controllers (not SMART-2).

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive and change to
that directory.  The file that is downloaded is SP2633.EXE.

2. From that drive and directory, execute the SoftPaq file:
    SP2633 [ENTER]
The following files should be created:
CPQDSKSA.NLM
SP2633.DOC

3. After the files are created, you may delete the downloaded file
SP2633.EXE if you wish.

4. From a client PC, log in to the server with ADMINISTRATOR rights.

5. Map an unused drive letter (for example F:) to the SYS:\ volume
root directory

6. Type the following command to copy CPQDSKSA.NLM v3.20 to the server:
COPY drive:\sudirectory\CPQDSKSA.NLM F:\SYSTEM

7. From the NetWare server prompt enter:
UNLOAD CPQDSKSA
A message stating that module cpqdsksa.nlm was unloaded should appear.

8. Enter:
LOAD CPQDSKSA
Verify that the version is now 3.20 from the message displayed.

Copyright 1996, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies




PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home