SOFTPAQ NUMBER:  SP2474
PART NUMBER:  183239-335
FILE NAME:  N/A
TITLE:  Computer Setup/VP and PC Diagnostics 
VERSION:  160 Rev A for Computer Setup/VP
	  10.11 Rev B for PC Diagnostics 

LANGUAGE:  Dutch

CATEGORY:  Diagnostics/Setup

PRODUCTS AFFECTED: 
Compaq Deskpro 4000/6000 Series

OPERATING SYSTEM: N/A

SYSTEM CONFIGURATION: N/A

EFFECTIVE DATE: 18 October 1996

ELECTRONIC DISTRIBUTION ALLOWED: Yes

SUPERSEDES: SP2109 and SP2094 for the Deskpro 4000/6000 Series

DESCRIPTION:
Creates three diskettes:
- Two (2) diskettes for Computer Setup/VP Version 160 Rev A 
- One (1) diskette for Personal Computer Diagnostics Version 10.11 Rev B 
These related utilities were formerly in two separate SoftPaqs.

Computer Setup and PC Diagnostics are both pre-installed on the 
Diagnostics Partition.  The diskettes in this SoftPaq can be used to 
update these utilities on the Diagnostics Partition or to restore them 
if the Diagnostics Partition has been destroyed.   Both utilities can be 
run by pressing F10 when the cursor moves to the upper right corner of 
the screen during power-up or reboot.  Or they can be run directly from 
these diskettes.  

Computer Setup allows the user to configure security and power 
management settings as well as system resources (DMA, IRQ, I/O Ports, 
and Memory).

Personal Computer Diagnostics contains programs that can test and 
inspect the state of the computer and its devices.  It is used with the 
Deskpro 4000/6000 Series, as well as other Compaq desktops and 
portables.

HOW TO USE:

1. Obtain three (3) formatted 1.44MB diskettes and place the first one 
in one of your diskette drives.

2. Download the SoftPaq to a directory on your hard drive and change to
that directory.  The file that is downloaded is SP2474.EXE.

3. Execute the SoftPaq file to create the three diskettes:  SP2474[ENTER]
You will be prompted to enter the additional diskettes.  
Label them as follows:
First Diskette -- Computer Setup/VP Version 1.60 Rev A (Disk 1 of 2)
Second Diskette -- Computer Setup/VP Version 1.60 Rev A (Disk 2 of 2)
Third Diskette -- Personal Computer Diagnostics Version 10.11 Rev B  

4. After the diskettes are created, you may delete the downloaded file
SP2474.EXE if you wish.

5.  To install Computer Setup/VP on the Diagnostics Partition, or to run 
it directly from the diskettes, power down your computer, place the 
first diskette created in Drive A:, power up your computer, and follow 
the on-screen menu.

6. To install Personal Computer Diagnostics on the Diagnostics 
Partition, or to run it directly from the diskettes, power down your 
computer, place the third diskette created in Drive A:, power up your 
computer, and follow the on-screen menu.

Copyright 1996, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies