PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP2409

SP2409 — MS-DOS SCSI Support Diskette VERSION 2.13 Rev A LANGUAGE English For Compaq ProLiant and ProSignia Servers with 32-Bit FAST-SCSI-2 or SMART SCSI Array Controllers SUPERSEDES SP398

SoftPaq Number SP2409
Filename sp2409.exe
Size 348K
Date 16 April 97
Version N/A
Operating System All

  Download sp2409.exe  


Readme

SOFTPAQ NUMBER:  SP2409
PART NUMBER:  181751-008
FILE NAME:  N/A
TITLE:  MS-DOS SCSI Support Diskette
VERSION:  2.13 Rev A
LANGUAGE:  English

CATEGORY:  Drivers/Miscellaneous

PRODUCTS AFFECTED:  Compaq ProLiant and ProSignia Servers 
with 32-Bit FAST-SCSI-2 or SMART SCSI Array Controllers

OPERATING SYSTEM:  N/A

SYSTEM CONFIGURATION:  N/A

EFFECTIVE DATE:  10 April 1997

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SUPERSEDES:  SP398

DESCRIPTION:  Creates the MS-DOS SCSI Support Diskette for Compaq 32-Bit 
Fast-SCSI-2 Controller and Compaq SMART SCSI Array Controller. 
The diskette contains the following DOS drivers:

- FWS2ASPI.SYS    Provides DOS ASPI support on all COMPAQ 32-Bit
                  Fast-SCSI-2 and COMPAQ 32-Bit Fast-Wide SCSI-2
                  controllers and support for accessing int 13h SCSI
                  devices in virtual mode without virtual DMA services.

- FWS2CD.SYS      Provides ASPI-based support for reading ISO 9660
                  CD-ROMs under Microsoft's CD-ROM extensions, 
                  MSCDEX.EXE.

- FWS2DISK.SYS    Provides full DOS support for up to 24 logical
                  drives when used with FWS2ASPI.

- SMRTSCSI.SYS    Provides support on SMART SCSI Array controller for
                  accessing logical drives in protected mode.  Also
                  supports multiple controllers and up to 24 logical
                  drives.

- MSCDEX.EXE      Provides CD-ROM support under DOS.

Enhancements:
- Adds support for multiple embedded controllers, as on ProLiant 6000
- Supports the 32-Bit Ultra-Wide SCSI-2 controller on Prosignia 300 
  and Prosignia 500 servers.

HOW TO USE:

1.  Obtain a formatted 1.44 MB diskette.

2.  Download the SoftPaq to a directory on your hard drive and change to
    that directory.  The file that is downloaded is SP2409.EXE.

3.  From that drive and directory, execute the SoftPaq file:
    SP2409 [ENTER] You will be prompted to place the formatted 1.44 MB
    diskette into a diskette drive to create the diskette.

4.  After the diskette is created, you may delete the downloaded file
    SP2409.EXE if you wish.

5.  For further instructions on how to install a specific driver, insert
    the diskette in drive A:, type README from the a:> prompt, and 
    follow the directions on the screen.

Copyright 1997, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered 
trademarks of their respective companies



PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home