| PaqPlace
For your Compaq |
Compaq SoftPaq Driver & Software Archive |
|
|
|
SP2406 — Compaq Systems ROMPaq Firmware Upgrade Diskette Ver. 3.12 Rev A for Compaq SystemPro/XL and Compaq ProSignia Servers.
| SoftPaq Number |
SP2406 |
| Filename |
SP2406.EXE |
| Size |
781K |
| Date |
17 April 97 |
| Version |
N/A |
| Operating System |
All |
Readme
SOFTPAQ NUMBER: SP2406
PART NUMBER: 275709-003
FILE NAME: N/A
TITLE: ProSignia and SystemPro/XL ROMPaq
VERSION: 3.12 Rev A
LANGUAGE: English
CATEGORY: ROMPaq
PRODUCTS AFFECTED: Compaq Systempro/XL and ProSignia Servers
NOTE: For ProLiant 1000, 1500, 2000, 4000, 4500, and 5000 Servers,
use SoftPaq SP2407.
For ProLiant 800 and 2500 Servers, use SoftPaq SP2408.
OPERATING SYSTEM: N/A
SYSTEM CONFIGURATION: N/A
EFFECTIVE DATE: 10 April 1997
ELECTRONIC DISTRIBUTION ALLOWED: Yes
SUPERSEDES: SP2403
DESCRIPTION: Creates the Systems ROMPaq Firmware Upgrade Diskette
for Compaq SystemPro/XL and Compaq ProSignia Servers. This release
provides an updated system ROM image for ProSignia 200 and
ProSignia 300/500 servers. For SystemPro/XL servers, this release
provides a System ROM image that remains the same as on the
superseded SoftPaq.
Enhancements
------------
ROM E15 - ProSignia 300/500 (02/24/97):
- Adds S.M.A.R.T. drive failure prediction support
Fixes
-----
ROM P01 - ProSignia 200 (02/24/97):
- Changes Secondary Disk Controller error from 1792 to 1782
- Skips multi-bit error check if ECC is disabled in order
to avoid reporting erroneous memory errors
- Frees IRQ 15 if secondary IDE is disabled, so that
it can be used by the system.
HOW TO USE:
1. Obtain a formatted 1.44 MB diskette.
2. Download the SoftPaq to a directory on your hard drive
and change to that directory. The file that is downloaded is
SP2406.EXE.
3. From that drive and directory, execute the SoftPaq
file: SP2406 [ENTER]
You will be prompted to place the formatted 1.44 MB diskette
into a diskette drive to create the diskette.
4. After the diskette is created, you may delete the
downloaded file SP2406.EXE if you wish.
5. Refer to the README file on the diskette for specific
upgrade instructions and additional help.
Copyright 1997, Compaq Computer Corporation. All rights reserved.
Product names mentioned herein may be trademarks and/or
registered trademarks of their respective companies
PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
|
Home
|