PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP2384

SP2384 — This SoftPaq upgrades the Netelligent Communications Platform to release 1.1 for the PC Card and ROM images.

SoftPaq Number SP2384
Filename sp2384.exe
Size 3236K
Date 17 October 96
Version N/A
Operating System All

  Download sp2384.exe  


Readme

SOFTPAQ NUMBER:  SP2384
PART NUMBER:  N/A
FILE NAME:  IOS0913.EXE
TITLE:  Netelligent 8500 Open Communications Platform
VERSION:  1.1
LANGUAGE:  English

CATEGORY:  Software Solutions/Misc

PRODUCTS AFFECTED:  Netelligent 8500 Multi-Protocol Routers

OPERATING SYSTEM:  Cisco IOS Version 1.26 and higher

SYSTEM CONFIGURATION:  N/A

EFFECTIVE DATE:  01 Oct 1996

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SUPERSEDES:  N/A

DESCRIPTION:  Use these files to upgrade Netelligent 8500 Multi-Protocol 
Routers to Netelligent 8500 Open Communications Platform Version 1.1. 
Contains the CISCO IOS, drivers, firmware, and SASH (Standalone Shell) 
Utility, Version 1.11.

IOS0913.EXE (dated 9-13-96) has the following features: 
1. Frame Relay/compression/MLB
2. PPP with Compression
3. Router Synchronization
4. X.21 signaling
5. IPX routing tables

100196BX.BIN (dated 10-01-96) has the following fixes: 
1. Resolved PCI bus timing problem when four TLAN adapters are 
installed.
2. Modified the PCI BIOS so that the PCI device search order appears as 
if it was from the bottom most slot to the topmost.

In the SASH (Standalone Shell) Utility Version 1.11, the LED will go 
solid green only if the IOS is spawned.  Also, if the IOS is not 
present, the LED will flash twice in amber.  This will prevent the 
confusion caused by a solid light when the pccard is unplugged.

HOW TO USE:

1.  Download the SoftPaq to a directory on your hard drive and change to 
that directory.  The file that is downloaded is SP2384.EXE.

2.  From that drive and directory, execute the SoftPaq file:
SP2384 [ENTER]
The following files should be created:
100196BX.BIN
IOS0913.EXE
INSTALL.BAT
SP2384.DOC
README.TXT

3.  After the files are created, you may delete the downloaded file 
SP2384.EXE if you wish.

4.  Refer to README.TXT for detailed instructions on installing and 
using the software.

Copyright 1996, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered 
trademarks of their respective companies



PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home