| PaqPlace
For your Compaq |
Compaq SoftPaq Driver & Software Archive |
|
|
|
SP2127 — Compaq Systems ROMPaq Firmware Upgrade Diskette Ver. 3.01 Rev A for Compaq SystemPro/XL and Compaq ProSignia Servers.
| SoftPaq Number |
SP2127 |
| Filename |
sp2127.exe |
| Size |
661K |
| Date |
31 July 96 |
| Version |
N/A |
| Operating System |
All |
Readme
Softpaq Solution: SP2127
File Name: P/N 182902-002
Title: ProSignia and SystemPro/XL ROMPaq Firmware Upgrade Diskette
Version: 3.01 Rev A
CATEGORY: ROMPaq
EFFECTIVE DATE: 31 July 1996
PRODUCTS AFFECTED: Compaq Systempro/XL and ProSignia Servers
OPERATING SYSTEM: N/A
SYSTEM CONFIGURATION: N/A
SUPERSEDES: SP1958
DESCRIPTION: Creates a diskette with updated system ROM images for
ProSignia 300/500 and Systempro servers.
Note: For ProLiant servers, see Softpaq SP2128.
Enhancements:
- Added support for the year 2000
- Added code to allow Com1 or Com2 to be on IRQ 3, 4, or 5 so
config "pager test" operates consistently
- Added extended year display and ROM date in SI table
- Added extra read from 8042 data input port during POST enable of
keyboard INT to fix an intermittent keyboard lockup problem at the
F1 prompt
- Set the PCI Latency Timer in PCI cards and bridges to PCI_ACFG 40h
instead of 32h or 38h
HOW TO USE:
1. Obtain a formatted 1.44 MB diskette.
2. Download the SoftPaq to a directory on your hard drive and change to
that directory. The file that is downloaded is SP2127.EXE.
3. From that drive and directory, execute the SoftPaq file:
SP2127 [ENTER]
You will be prompted to place the formatted 1.44 MB diskette into a
diskette drive to create the diskette.
4. After the diskette is created, you may delete the downloaded file
SP2127.EXE if you wish.
5. Refer to the README file on the diskette for specific upgrade
instructions and additional help.
Copyright 1996, Compaq Computer Corporation. All rights reserved.
Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies
PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
|
Home
|