Softpaq:  SP2075
File Name:  P/N 145202-008
Title:  Drive Array Advanced Diagnostics (DAAD)
Version:  1.37 Rev A

CATEGORY:  Diagnostics/Setup

EFFECTIVE DATE:  24 July 1996

PRODUCTS AFFECTED:  Compaq ProLiant and ProSignia servers using a 
Smart SCSI Array Controller and Fast-SCSI-2 drives

OPERATING SYSTEM:  N/A

SYSTEM CONFIGURATION: N/A

SUPERSEDES:  SP1117

DESCRIPTION:  Drive Array Advanced Diagnostics utility is a DOS based 
tool designed to run on any Compaq products that contain a Smart SCSI 
Array Controller using Fast-SCSI-2 drives. The two main functions of 
DAAD are to collect all possible information about the array controllers 
in the system and generate a list of detected problems.  This data can 
then be saved to a file for analysis. In most cases, DAAD will provide 
enough information to initiate problem resolution immediately.

Enhancements:
- Indicates type of SCSI Chip installed on SMART-2 controllers
- Recognizes new P6 system model

HOW TO USE:

1. Obtain a formatted 1.44 MB diskette.

2. Download the SoftPaq to a directory on your hard drive and change to 
that directory.  The file that is downloaded is SP2075.EXE.

3. From that drive and directory, execute the SoftPaq file:
   SP2075 [ENTER]
You will be prompted to place the formatted 1.44 MB diskette into a 
diskette drive to create the diskette.

4. After the diskette is created, you may delete the downloaded file 
SP2075.EXE if you wish.

5. To run the utility, reboot with the newly created diskette in 
drive A.

Copyright 1996, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered 
trademarks of their respective companies