• This is the Microsoft Windows audio driver for ADI host-based audio CODECs in the Presario and Evo models listed above.

1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename
based on the SoftPaq Number above.
2. Execute the downloaded file and follow the on-screen instructions.
Entering "Y" to confirm the unpacking of files creates a new directory
folder in the download directory.  All files are unpacked into this
newly created directory.
3. After the directory has been created, you may delete the
self-extracting file downloaded in step 1.
4. To install, run SETUP.EXE.  For example, enter:
   <path>\SETUP
   where <path> is the drive and directory created in step 2
   Follow the on-screen instructions.
5. To silent install, run with the /k switch from the command prompt.  For example, enter:
   <path>\SETUP -s
   where <path> is the drive and directory created in step 2
6. After the installation is completed, you may delete the directory
created in step 2 if you wish.

TITLE: Notebooks ADI Audio Driver for Windows XP and Windows 2000

VERSION: 5.12.01.3032 Rev. A
DESCRIPTION:
This is the Windows XP and Windows 2000 audio driver for ADI host-based audio CODECs in
the Compaq notebook models listed below.

PURPOSE: Routine Release
SOFTPAQ NUMBER: SP20306
SUPERSEDES: None
EFFECTIVE DATE: January 16, 2002
CATEGORY: Audio
SSM SUPPORTED: Yes

PRODUCT TYPE(S)
Notebooks
 
PRODUCT MODEL(S): 
Compaq Presario 2700 
Compaq Evo N180

OPERATING SYSTEM(S): 
Microsoft Windows XP 32-bit Personal
Microsoft Windows XP 32-bit Professional
Microsoft Windows 2000
 
LANGUAGE(S): 
US English
 
PREREQUISITES: 
N/A
 
HOW TO USE: 

1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions.
Entering "Y" to confirm the unpacking of files creates a new directory
folder in the download directory.  All files are unpacked into this
newly created directory.

3. After the directory has been created, you may delete the
self-extracting file downloaded in step 1.

4. To install, run SETUP.EXE.  For example, enter:
<path>\SETUP
where <path> is the drive and directory created in step 2
Follow the on-screen instructions.

5. To silent install, run with the /k switch from the command prompt.  For
example, enter:
<path>\SETUP -s
where <path> is the drive and directory created in step 2

6. After the installation is completed, you may delete the directory
created in step 2 if you wish.
 
 
Copyright (C)2001, Compaq Computer Corporation.  All rights reserved.
Product names mentioned herein may be trademarks and/or registered trademarks
of their respective companies