TITLE: Thin Client T1010 (8/32) Rapport Package for WinCE Firmware with RDP & TEC

VERSION: 3.5.1 Rev B441.22
DESCRIPTION: This contains the Rapport package to add WinCE firmware with RDP & TEC
to a Compaq Thin Client T1010.

PURPOSE: Routine Release
SOFTPAQ NUMBER: SP20093
SUPERSEDES: None
EFFECTIVE DATE: February 28, 2002
CATEGORY: Network
SSM SUPPORTED: No

PRODUCT TYPE(S)
Thin Clients
 
PRODUCT MODEL(S): 
Compaq Thin Client T1010

OPERATING SYSTEM(S): 
Microsoft Windows NT 4.00 Server with Service Pack 5 or higher
Microsoft Windows NT 4.00 Terminal Server with Service Pack 5 or higher
Microsoft Windows NT 4.00 Workstation with Service Pack 5 or higher
Microsoft Windows 2000 Server with Service Pack 1 or higher
Microsoft Windows 2000 Advanced Server with Service Pack 1 or higher
Microsoft Windows 2000 Professional with Service Pack 1 or higher
 
LANGUAGE(S): 
US English

FIXES: 
 - Terminal locked up when powered off at the Single Button Connect screen. 
 - Best DDC lockup if monitor cable is not attached or monitor is not DDC 
   compatible. 
 - Under Terminal Properties\System tab under Flash Memory, "Devive 2" 
   should be spelled as "Device 2".
 - In Windows 2000, bottom half of mouse pointer disappeared after 
   reaching top of screen display. 
 - Winterm could lock up on Splash Screen if some special monitor was 
   attached. (i.e WY-1570DES). 
 - Checksum error when using Compaq Thin Client Manager to upgrade 
   firmware. 
 - Turning off power via power switch did not release DHCP address. 
 - Splash screen display flickered on boot-up. 
 - Unit locked up on splashscreen with LG771G monitor. 
 - Compaq mouse cursor disappeared when hot-swapping. 
 - ESC did not allow user to exit to  "Terminal Login", only Alt-F4 
   should exit. 
 - Video polarity issue. 
 - Failed to properly write correct checksum to EEPROM. 
 - (TEC) Connect and Disconnect buttons now have correct focus.  
 - (TEC) 3270 cursor select function now operates on Protected fields. 
 - (TEC) GPF when large amounts of data are placed in the keyboard buffer. 
 - (TEC) Fixed GPF in 3270 mode if TN3270 packed is less than 5 bytes.  
 - (TEC) Added setup option to prevent VT screen clearing on 80/132 columns switch.
 - (TEC) 3270 codepages not being reported back to mainframe if non-default.
 - (TEC) TVI 955.  Fixed problem with Insert Char not unprotecting inserted spaces 
         (Tab-key issue).
 - (TEC) TVI 955.  Set attribute Esc G now does not cause the write protect status to be 
         cleared.
 - (TEC) TVI 955.  When tabbing between fields, the cursor always stopped at the home 
         position, even if protected.
 - (TEC) Additional modifications to prevent extra sessions from being spawned in IBM3270 
         emulation via <ALT> S key sequence.
 - (TEC) Mapped <ALT> to be the function key in TVI mode so that ALT <alphanumerics> send 
         additional host sequences.  The ALT-Numeric keys won't work on the keypad.
 - (TEC) Printing 'freeze' in TVI mode.
 - (TEC) Print screen "hangs" terminal.
 - (TEC) Nulls are passed through parallel port causing characters to be printed in forms.
 - (TEC) RST/FIN discrepancies on TCP disconnects.
 - (TEC) Invalid characters in Connection Name of Connection Wizard.
 - (TEC) Incorrect reset of read-reply status flag on write error code.
 - (TEC) "Euro" key not displayed in a IBM-3270 emulation.
 - (TEC) IBM 5250 reset field full flag on reset -  could not clear a 0018 error.
 - (TEC) Correct 5250 Uppercase (Monocase) Fields so that National characters 
         (as well as A-Z) are converted to uppercase.
 - (TEC) Numeric 3270 fields now only accept numeric data when NumLock is asserted. 
 - (TEC) 5250 print "terminals are being reset to VT100 emulation" on connection.
 
PREREQUISITES: 
Rapport 3.01 or later must be installed on your server.
 
HOW TO USE: 

1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable
with a filename based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen
instructions.

3. Read the *.RSP file and follow the instructions for each
script before running them from Rapport, in order for
them to work correctly.
 

(c) 2002 Compaq Information Technologies Group, L.P.

Compaq and the Compaq logo are trademarks of Compaq Information Technologies Group, L.P. 
in the U.S. and other countries.
All other product names mentioned herein may be trademarks of their respective companies.