SOFTPAQ NUMBER: SP19844
PART NUMBER:  N/A
FILE NAME:  ADPT160M.HAM
TITLE:  Compaq 64-Bit/66-MHz Wide Ultra3 Controller Driver 
        for Novell NetWare
VERSION:  17.12m
LANGUAGE:  English

CATEGORY:  Drivers

DIVISIONS: Systems

PRODUCTS AFFECTED:  
64-Bit/66-MHz Dual Channel Wide Ultra3 SCSI Adapter,
64-Bit/66-MHz Single Channel Wide Ultra3 SCSI Adapter,
ProLiant 1600, ProLiant 1850R, ProLiant 3000, ProLiant 400,
ProLiant 5500, ProLiant 6400R, ProLiant 800, ProLiant 8000,
ProLiant 8500, ProLiant CL1850, ProLiant CL380, ProLiant DL360,
ProLiant DL360 G2, ProLiant DL380, ProLiant DL380 G2,
ProLiant DL380 G2 Packaged Cluster, ProLiant DL580,
ProLiant DL580 G2, ProLiant DL760, ProLiant ML330,
ProLiant ML330 G2, ProLiant ML330e, ProLiant ML350,
ProLiant ML350 G2, ProLiant ML370, ProLiant ML370 G2,
ProLiant ML530, ProLiant ML530 G2, ProLiant ML570,
Prosignia Server 720, Prosignia Server 740 

OPERATING SYSTEM:  Novell NetWare 5.1
                   Novell NetWare 6.0

SYSTEM CONFIGURATION: N/A

PREREQUISITES: N/A

EFFECTIVE DATE:  July 24, 2002

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  5.x

SUPERSEDES:  N/A

DESCRIPTION:  
 This SoftPaq unpacks the files needed to install the ADPT160M.HAM
 v17.12m driver. The following files are included:
   - ADPT160M.HAM
   - ADPT160M.DDI
   - CPQSHD.CDM
   - CPQSHD.DDI
   - NWPA.NLM (v3.12 for NW 6.0)
   - NWPA.NLM (v3.09 for NW 5.1)
   - MM.NLM (v2.03 for NW 5.1)
   - README.TXT

Enhancements/Fixes:
 The ADPT160M.HAM v17.12m driver has been updated to prevent the
 following problem from occurring:

 As NetWare 5.1 or NetWare 6 initializes on a ProLiant server that
 is configured with any of the following SCSI adapters, the server
 may hang with the error: 

 INFORMATIONAL: Host adapter hardware error {414020A2}

 Integrated Dual Channel Wide Ultra3 SCSI Adapter 
 64-Bit/66-MHz Single Channel Wide Ultra3 SCSI Adapter 
 64-Bit/66-MHz Dual Channel Wide Ultra3 SCSI Adapter 

 Note: This error message does not indicate a hardware problem.

HOW TO USE:
 1. Download the SoftPaq to a directory on your hard drive. 
    The SoftPaq file that is downloaded is a self-extracting 
    executable with a file name based on the SoftPaq Number above. 

 2. Execute the downloaded file and follow the on-screen 
    instructions. Press the Space Bar to confirm the unpacking
    of files into the download directory. 

 3. After the files have been unpacked, you may delete the 
    self-extracting SoftPaq file downloaded in step 1. 

 4. For installation instructions, refer to README.TXT in 
    the created directory.  

Copyright 2002 Compaq Information Technologies Group, L.P.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies