SOFTPAQ NUMBER: SP19702
PART NUMBER: N/A
FILE NAME: N/A
TITLE: Compaq Management Agents for OS/2
VERSION: 3.98
LANGUAGE: English

CATEGORY: Software Solutions

DIVISIONS: Systems

PRODUCTS AFFECTED: 
	All Compaq Servers running Compaq Management 
                  Agents for OS/2 v3.98

OPERATING SYSTEM:       
      	1. IBM OS/2 Warp Server for e-business
      	2. Convenience Package for IBM OS/2 Warp Server 
                      for e-business

SYSTEM CONFIGURATION: N/A 

EFFECTIVE DATE: March 06, 2002

ELECTRONIC DISTRIBUTION ALLOWED: YES

SUPERSEDES: SP18012

DESCRIPTION:   
                This SoftPaq creates three diskettes for the Compaq
                Management Agents for OS/2, v3.98. These diskettes
                contain all of the agents for OS/2. For details on
                enhancements to the agents and installation, refer
                to the README.TXT on the generated diskette.

Supported Products:

               The Compaq Management Agents for OS/2 have been 
               tested on the following Compaq Products:
   
               Compaq ProLiant family of servers

Enhancements and Fixes:

               Support for the following Compaq Server
	       
	       ProLiant ML530 G2
	       	
 
UPDATES: None             

HOW TO USE:             

             1. Download the Softpaq to an empty directory on your 
      		hard drive and change to that directory. The file that 
      		is downloaded is an executable with a filename based on
      		the SoftPaq Number above i.e SP19702.EXE.

             2. From that drive and directory, execute the downloaded
      		Softpaq file. The following files should be created:
         	QRST5.EXE
         	CMA398._01
         	CMA398._02
         	CMA398._03
         	SP19702.TXT

             3. Obtain three formatted 1.44 MB diskettes.

             4. Run the QRST5.EXE and follow the on-screen instructions.

             5. After the diskettes are created, you may delete the 
      		downloaded file (SP19702.EXE) and the other files created 
      		on your hard drive in step 1.

             6. To install the Compaq Management Agents for OS/2,
       		Insert the first diskette. Run a:\install and follow the 
       		on-screen instruction.

             7. TCP/IP  Installation Screen will be executed during the 
       		process of Agents installation if TCP/IP modules are not 
       		installed in the system.

             8. Select SNMP Networking Kit. Change the default path 
     		to <Drive>:\TCPIP. Click on 'Install'. Installation will 
		continue.

             9. Configure the SNMP Settings in TCP/IP Configuration 
        	Screen.

        	SYSCONTACT   - specifies a contact person for the
                                        	server.
        	SYSLOCATION  - specifies the physical location of the 
                                         	server.

       	 	Note: The Management Agents set both of these variables 
       	 	to the default value of  "." during installation. 

        	Configure SNMP Manager Access Authorization and Trap 
       		destination in Page 2 of this screen.

            10. To exit, select close from the system-icon pull down menu. 
      		At the prompt select to save or discard the changes.

            11. Agents installation will continue. Remove the diskette when 
     		installation is complete.
           	
            12. Reboot the server.

		Note: Refer to README.TXT on the diskette for installation
      		instructions and additional information.


Copyright 2002, Compaq Computer Corporation. All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.