SOFTPAQ NUMBER: SP19528
FILE NAME:  N/A
TITLE:  BIOS upgrade for the 64-Bit/66-MHz Dual Channel Wide 
        Ultra3 SCSI Adapter P/N 129803-B21
VERSION: 3.02
LANGUAGE:  English	

CATEGORY:  Storage

DIVISIONS: Storage Product Division

PRODUCTS AFFECTED: 
 ProLiant 1600, ProLiant 1850R, ProLiant 3000, ProLiant 6400R,
 ProLiant 5500, ProLiant 7000,  ProLiant 8000,  
 ProLiant DL360, ProLiant DL380, ProLiant ML350,
 ProLiant ML370, ProLiant ML570,
 
OPERATING SYSTEM:  MICROSOFT WINDOWS NT VERSION 4.0 

SYSTEM CONFIGURATION: Intel platforms

PREREQUISITES: N/A
 
EFFECTIVE DATE: December 12, 2000

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  5.0

SUPERSEDES:  N/A

DESCRIPTION:  
This SoftPaq contains the BIOS upgrade for the 64-Bit/66-MHz 
Dual Channel Wide Ultra3 SCSI Adapter P/N 129803-B21. This BIOS 
upgrade is required if this adpater is used in a Compaq server 
to support Compaq DRTape. 

NOTE:
The DRTape feature is supported only on the following systems
with the corresponding listed BIOS Code Levels, and the date
of the BIOS code must be the same date or newer than the date
listed:
       Server Type          BIOS Code Level      Date
       PL 8000                   P41             12/27/1999 
       PL 7000 (Xeon)            P40/P43         12/27/1999
       PL 6400R                  P11             12/10/1999
       PL 5500 (Xeon)            P12             12/10/1999
       PL 3000                   P19             12/22/1999
       PL 1850R                  P07             12/10/1999
       PL 1600 (Pentium II)      P08             12/10/1999
       DL 380                    P17             12/10/1999      
       DL 360                    P21             12/23/1999       
       ML 570                    P20             08/24/2000
       ML 370                    P17             12/10/1999      
       ML 350                    D02/F02         06/02/2000
       
       
       
            
Enhancements/Fixes: Initial Release


HOW TO USE:
1. Download the SoftPaq to a directory on your hard drive. 
The SoftPaq file that is downloaded is a self-extracting 
executable with a file name based on the SoftPaq Number above. 

2. Execute the downloaded file and follow the on-screen 
instructions. Press the Space Bar to confirm the unpacking
of files into the download directory. 

3. After the files have been unpacked, you may delete the 
self-extracting SoftPaq file downloaded in step 1. 

4. Please print out the 'readme.txt file and follow the 
installation instructions.

5. DO NOT run this program from a hard disk, a DOS Window, 
a DOS Shell, in NT 32-bit mode, or with EMM386.exe active.

6. Copy the expanded files to a bootable DOS floppy diskette.
Boot your system from the DOS bootable floppy diskette. Type 
' UPDATE ' from the ' A:\ ' DOS prompt. 
Press CTRL-C to stop or press any key to continue...

7. After the installation is completed, you may delete 
the files unpacked in step 2. 

Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies