• These drivers are deployed for the use of the Compaq iPAQ 10/100 Fast Ethernet PCI Card on the Windows XP operating system.

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive.The file downloaded is a 
self-extracting executable with a filename based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions to install the 
drivers and firmware update utility.

TITLE: Compaq iPAQ 10/100 Fast Ethernet PCI Adapter Driver for Windows XP

VERSION: 1.0
DESCRIPTION:  This contains the Windows XP driver for the Compaq iPAQ 10/100 Fast Ethernet 
PCI Adapter in desktop computers running Windows XP.

PURPOSE: Recommended Update
SOFTPAQ NUMBER: SP19433
SUPERSEDES: None
PART NUMBER: 250334-00A-003
EFFECTIVE DATE: December 13, 2001
CATEGORY: Network
SSM SUPPORTED: Yes

PRODUCT TYPE(S): Desktops

PRODUCT MODEL(S): Any desktop with PCI slot

OPERATING SYSTEM(S):  Microsoft Windows XP

LANGUAGE(S):  English  

HOW TO USE:

Standard Installation

   Please refer to the Getting Started Guide that came with your 
   product for the hardware installation. 

   To install the drivers:

   1. Run softpaq.
   2. Power down computer.  Unplug computer.  Open computer case.  
      Install Compaq 10/100 Ethernet PCI Adapter in an available PCI slot.
      Close case.  Plug in computer.  Power on computer.
   3. Hardware and drivers should be automatically installed without
      user intervention.
   4. Alert should be given from systray stating that your hardware 
      has been installed correctly and is ready for use.

  * If the Hardware Found Wizard appears...

   1. Choose "Install from a list or specific location (Advanced)".
   2. Click Next.
   3. Make sure the checkbox "Include this location in the search" is the 
      only box checked.
   4. Click the Browse button and navigate to the folder to which you 
      unpacked the SoftPaq files (this is the folder that contains the 
      ReadME.txt file you are currently reading).
   5. Click Next when done.
   6. Windows copies the driver files and installs the hardware in the
      system.
   7. Click "Finish" when the installation is complete.


Upgrading previous installation

    If you have previously installed a version of the XP drivers, 
    you are required to do a driver update:
    1. Click the Start button.
    2. Click on "Control Panel".
    3. Click on "Switch to Classic View"
    4. Double click on "System".
    5. Click on the Hardware Tab.
    6. Click on the Device Manager Button.
    7. Double click on the Network Adapter section.  (If the adapter is
       not listed, it may be under Unknown Devices).
    8. Right click on the device.
    9. Select "Update Driver" from the pop-up list.
   10. Choose "Install from a list or specific location."  Click Next.
   11. Make sure only "Include this location in search" is checked.
   12. Click the Browse button.  Navigate to the folder to which you 
       extract the softpaq.
   13. Click OK.
   14. Click Next to proceed.
   15. Windows should find the new drivers in the softpaq directory.  
   16. Follow the prompts to complete the update installation.
 

Copyright 2001, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.