• N/A

1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
Entering "Y" to confirm the unpacking of files creates a new directory 
folder in the download directory.  All files are unpacked into this 
newly created directory.

3. After the directory has been created, you may delete the 
self-extracting file downloaded in step 1.

4. To install, run SETUP.EXE.  For example, enter:

   <path>\SETUP
   where <path> is the drive and directory created in step 2

   Follow the on-screen instructions.

5. To silent install, run with the -s switch from the command prompt.  For example, enter:

   <path>\SETUP -s
   where <path> is the drive and directory created in step 2

6. After the installation is completed, you may delete the directory 
created in step 2 if you wish.

TITLE: Evo ADI Audio Driver for Windows XP

VERSION: 1.00 Rev C
DESCRIPTION:
This is the Microsoft Windows XP audio driver for the ADI audio CODEC in the Evo models 
listed below. It enables the features and functions of these audio chips.

PURPOSE: Routine Release
SOFTPAQ NUMBER: SP19244
SUPERSEDES: None
EFFECTIVE DATE: January 4, 2002
CATEGORY: Audio
SSM SUPPORTED: Yes

PRODUCT TYPE(S)
Notebooks
 
PRODUCT MODEL(S): 
Compaq Evo N200
Compaq Evo N160

OPERATING SYSTEM(S): 
Microsoft Windows XP 32-bit Professional
Microsoft Windows XP 32-bit Home
 
LANGUAGE(S): 
US English
 
PREREQUISITES: 
N/A
 
HOW TO USE: 

1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions.
Entering "Y" to confirm the unpacking of files creates a new directory
folder in the download directory.  All files are unpacked into this
newly created directory.

3. After the directory has been created, you may delete the
self-extracting file downloaded in step 1.

4. To install, run SETUP.EXE.  For example, enter:
<path>\SETUP
where <path> is the drive and directory created in step 2
Follow the on-screen instructions.

5. To silent install, run with the -s switch from the command prompt.  For
example, enter:
<path>\SETUP -s
where <path> is the drive and directory created in step 2

6. After the installation is completed, you may delete the directory
created in step 2 if you wish.
 
 
Copyright (C)2001, Compaq Computer Corporation.  All rights reserved.
Product names mentioned herein may be trademarks and/or registered trademarks
of their respective companies