TITLE: Remote ROM Flash (686DF ROM) for Evo N600c Series

VERSION: 01/9/14 Rev. A
DESCRIPTION:
This SoftPaq creates .CAB files that contain a binary image for
the System ROM for Evo N600c Series. The BIOS/ROM image file must
be used with Remote Management Software in order to actually flash (upgrade)
the ROM image on one of the affected Evo notebooks. The ROM Family and ROM
date can be determined by running F10 Setup.

PURPOSE: Routine Release
SOFTPAQ NUMBER: SP19237
SUPERSEDES: N/A
EFFECTIVE DATE: October 5, 2001
CATEGORY: ROMPaqs and System Software
SSM SUPPORTED: Yes

PRODUCT TYPE(S)
Notebooks
 
PRODUCT MODEL(S): 
Compaq Evo N600c Series

OPERATING SYSTEM(S): 
OS Independent
 
LANGUAGE(S): 
US English
 
ENHANCEMENTS: 
 - Adds Rompaq support for updating Armadastation EM firmware from the Evo N600c.
 
FIXES: 
 - Fixes issue with DriveLock password not being saved after a warm boot.
 - Fixes issue with Rompaq error handling so that BIOS update failures are reported to 
   the user.  
 - Fixes issue where "Screensaver password must be set" error message was being 
   generated when "lock keyboard at boot" option is enabled.
 
PREREQUISITES: N/A

HOW TO USE: 

1. Download the SoftPaq to a temporary, empty directory on your hard drive.
The file downloaded is a self-extracting executable with a filename based on
the SoftPaq Number above.

2. The BIOS/ROM image file must be used with Remote Management Software in
order to actually flash (upgrade) the ROM image on one of the affected Evo
notebooks.

3. When used with SSM, copy the SoftPaq to the file store.

4. When used with WINFLASH, run the SoftPaq to get the .cab file.


Copyright 2001, Compaq Computer Corporation.  All rights reserved.
Product names mentioned herein may be trademarks and/or registered trademarks 
of their respective companies