Softpaq Solution:  SP1923
File Name:  P/N 173009-009
Title:  Deskpro/ProLinea System ROMPaq 486G
Version:  05/01/96 486G

CATEGORY:  ROMPaq 

EFFECTIVE DATE:  01 May 1996

PRODUCTS AFFECTED:  Prolinea 5xxx and Deskpro 5xxx (selected models)

OPERATING SYSTEM:  N/A 

SYSTEM CONFIGURATION:  N/A

SUPERSEDES:  All earlier 486G Family System ROMs

DESCRIPTION:  This creates a ROMPaq firmware upgrade diskette to upgrade 
the System ROM on Deskpro and ProLinea units with a 486G Family ROM to the 
05/01/96 version.  The ROM Family and ROM date can be determined 
by running F10 Setup.  This 05/01/96 version stays connected to a network 
after wakeup from suspend mode, fixes problems with "format /s" and "sys" 
commands with some drives, fixes POST problems with Sony Multiscan 
monitors, and fixes a lost video problem with the Artist PCI Video 
adapter. 

HOW TO USE:

1.  Obtain a formatted 1.44 MB diskette.

2.  Download the SoftPaq to a directory on your hard drive and change to 
that directory.  The file that is downloaded is SP1923.EXE.

3.  From that drive and directory, execute the SoftPaq file:
    SP1923 [ENTER]
You will be prompted to place the formatted 1.44 MB diskette into a 
diskette drive to create the diskette.

4.  After the diskette is created, you may delete the downloaded file 
SP1923.EXE if you wish.

5.  Keeping the newly created diskette in the A: drive, cycle system 
power to boot from the ROMPaq diskette.

6.  Follow the on-screen instructions to select the 05/01/96 Compaq 
System ROM and flash the firmware.

Copyright 1996, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered 
trademarks of their respective companies