Softpaq Solution:  SP1895
File Name:  SETUP.EXE
Title:  DOS Setup Utility for Matrox Millennium Adapter
Version:  1.06 Rev A
Language:  English

CATEGORY:  Diagnostics/Setup

EFFECTIVE DATE:  15 June 1996

PRODUCTS AFFECTED:  Any Compaq products (such as certain models of 
Deskpro and ProLinea desktops and minitowers) using a Matrox Millennium 
display adapter.  To determine if your computer has a Matrox Millennium 
adapter, run the Compaq System Configuration Utility or F10 Setup.

OPERATING SYSTEM:  DOS 5.0 or later

SYSTEM CONFIGURATION:  DOS 5.0 or later 

SUPERSEDES:  N/A

DESCRIPTION:  Creates a diskette that provides a DOS Setup Utility for 
the  Matrox Millennium Graphics Adapter. The utility provides 
information about the controller such as VBIOS revision level and  
memory address of the controller or controllers. The utility also  
allows you to select the monitor that you are using and test the  
various graphics modes that are supported. This is a DOS utility.   

HOW TO USE:

1.  Obtain a formatted 1.44 MB diskette.

2.  Download the SoftPaq to a directory on your hard drive and change to 
that directory.  The file that is downloaded is SP1895.EXE.

3.  From that drive and directory, execute the SoftPaq file:
    SP1895 [ENTER]
You will be prompted to place the formatted 1.44 MB diskette into a 
diskette drive to create the diskette.

4.  After the diskette is created, you may delete the downloaded file 
SP1895.EXE if you wish.

5.  At this point, the Driver Support diskette has been created and is 
ready to use for upgrading.

6.  Read all README files before installing the utility.

Copyright 1996, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered 
trademarks of their respective companies