PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP1886

SP1886 — Fix CIM Agents thresholding issues under SCO OpenServer 5.0; This Softpaq must be installed as root in System Maintenance mode

SoftPaq Number SP1886
Filename sp1886.exe
Size 367K
Date 28 June 96
Version N/A
Operating System All

  Download sp1886.exe  


Readme

Softpaq Solution:  SP1886
File Name:  CPQSMUXD
Title:  Fix CIM Agents Threshold Issues under SCO OpenServer 5.0
Version:  2.61
Language:  English

CATEGORY:  Software Solution/Servers

EFFECTIVE DATE:  01 June 1996

PRODUCTS AFFECTED:  Compaq Servers

OPERATING SYSTEM:  SCO OpenServer 5.0 or SCO OpenServer 5.0 from Compaq, 
including the Compaq Extended Feature Supplement (EFS) 5.03b

SYSTEM CONFIGURATION:  Compaq Insight Management Agents Version 2.61 for 
SCO OpenServer 5.0

DESCRIPTION:
When thresholds are set on a server running Insight Management Agents 
Version 2.61 under SCO OpenServer 5.0, the customer may see incorrect 
detailed alarm values in the "Alarm Details" window of Compaq Insight 
Manager.  This could affect the "Current Value" and "Threshold Top" 
fields for "User Threshold - Rising Alarm".  
Also, the Insight Management SMUX peer on the SCO OpenServer 5.0 server 
could crash while delivering the alarm, causing the server to become 
unmanageable.

The Insight Management SMUX peer has been modified to correct both 
problems mentioned above.  Refer to the README.1ST file created in Step 3
below for the steps to replace the SMUX peer on your SCO OpenServer 5.0
server.

Compaq provided a snmpd patch from SCO with Insight Management Agents 
version 2.61 to correct problems in /etc/snmpd as distributed with 
SmartStart 2.50. This Softpaq will prompt you when the snmpd patch is 
needed on your server and, with your permission, apply the patch for you.

HOW TO USE:

NOTE:
These steps are performed under DOS, Windows 3.1, or Windows NT 3.51.

1.  Obtain a formatted 1.44 MB diskette.

2.  Download the SoftPaq to a directory on your hard drive and change to 
that directory.  The file that is downloaded is SP1886.EXE.

3.  From that drive and directory, execute the SoftPaq file:
    SP1886 [ENTER]
The following files should be created:
    QRST5.EXE
    SP1886._01
    README.1ST

4.  For instructions on creating the diskette and installing the 
software, refer to the README.1ST file.

Copyright 1996, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered 
trademarks of their respective companies



PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home