| PaqPlace
For your Compaq |
Compaq SoftPaq Driver & Software Archive |
|
|
|
SP18601 — System Enhancements Disk for Windows 98 SE
| SoftPaq Number |
SP18601 |
| Filename |
sp18601.exe |
| Size |
2204K |
| Date |
September 14, 2001 |
| Version |
6.00 Rev. B |
| Operating System |
Windows 98 SE |
| Products Affected |
Compaq Evo N600c: All Models Compaq Evo N400c: All Models Compaq Armada 110: All Models Compaq Evo N110: All Models Compaq Evo N150: All Models |
| Supersedes |
SP17435, SP17487 |
Readme
SOFTPAQ NUMBER: SP18601
PART NUMBER: N/A
FILE NAME: N/A
TITLE: System Enhancements Disk for Windows 98 SE
VERSION: 6.00 Rev. B
LANGUAGE: Taiwanese Chinese (TW)
CATEGORY: Operating System Enhancements
DIVISIONS: Portables
PRODUCTS AFFECTED:
Compaq Evo N600c: All Models
Compaq Evo N400c: All Models
Compaq Armada 110: All Models
Compaq Evo N110: All Models
Compaq Evo N150: All Models
OPERATING SYSTEM: Microsoft Windows 98 SE
SYSTEM CONFIGURATION: N/A
PREREQUISITES: N/A
EFFECTIVE DATE: September 14, 2001
ELECTRONIC DISTRIBUTION ALLOWED: Yes
SOFTPAQ UTILITY VERSION: 5.0
SUPERSEDES: SP17435, SP17487
DESCRIPTION: This Softpaq installs Microsoft fixes and Compaq enhancements designed
to help your system run better. This is specifically for Windows 98 SE for the
Compaq notebook models listed above.
NOTE: This does not support Compaq System Software Manager (SSM).
ENHANCEMENTS/FIXES:
- Fixes issue where "hot" insert did not function when inserting the following
PC Cards, which were not being detected by Windows Device Manager:
- Intel NIC Combo PC Card
- Xircom PC Card
HOW TO USE:
1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename
based on the SoftPaq Number above.
2. Execute the downloaded file and follow the on-screen instructions.
Entering "Y" to confirm the unpacking of files creates a new directory
folder in the download directory. All files are unpacked into this
newly created directory.
To create the two optional installation diskettes, run MAKEDISK.BAT and
follow on-screen instructions.
3. After the directory has been created, you may delete the
self-extracting file downloaded in step 1.
4. To install, run SETUP.EXE. For example, enter:
<path>\SETUP
where <path> is the drive and directory created in step 2
- or -
a diskette drive letter if using the optional
installation diskettes
Follow the on-screen instructions.
5. After the installation is completed, you may delete the directory
created in step 2 if you wish.
Copyright 2001, Compaq Computer Corporation. All rights reserved.
Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies
PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
|
Home
|