PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP18591

SP18591 — System Enhancements Disk for Windows 98 SE

SoftPaq Number SP18591
Filename sp18591.exe
Size 2220K
Date September 14, 2001
Version 6.00 Rev. B
Operating System Windows 98 SE
Products Affected Compaq Evo N600c: All Models Compaq Evo N400c: All Models Compaq Armada 110: All Models Compaq Evo N110: All Models Compaq Evo N150: All Models
Supersedes SP17426, SP17478

  Download sp18591.exe  


Readme

SOFTPAQ NUMBER:  SP18591
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  System Enhancements Disk for Windows 98 SE
VERSION:  6.00 Rev. B
LANGUAGE:  Dutch (NL)

CATEGORY:  Operating System Enhancements

DIVISIONS:  Portables

PRODUCTS AFFECTED:
     Compaq Evo N600c: All Models
     Compaq Evo N400c: All Models
     Compaq Armada 110: All Models
     Compaq Evo N110: All Models
     Compaq Evo N150: All Models

OPERATING SYSTEM:  Microsoft Windows 98 SE

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  N/A

EFFECTIVE DATE:  September 14, 2001

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  5.0

SUPERSEDES:  SP17426, SP17478

DESCRIPTION: This Softpaq installs Microsoft fixes and Compaq enhancements designed 
to help your system run better.  This is specifically for Windows 98 SE for the 
Compaq notebook models listed above.

       NOTE: This does not support Compaq System Software Manager (SSM).

ENHANCEMENTS/FIXES: 
 - Fixes issue where "hot" insert did not function when inserting the following
   PC Cards, which were not being detected by Windows Device Manager:
   - Intel NIC Combo PC Card
   - Xircom PC Card

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
Entering "Y" to confirm the unpacking of files creates a new directory 
folder in the download directory.  All files are unpacked into this 
newly created directory.

To create the two optional installation diskettes, run MAKEDISK.BAT and
follow on-screen instructions.

3. After the directory has been created, you may delete the 
self-extracting file downloaded in step 1.

4. To install, run SETUP.EXE.  For example, enter:

   <path>\SETUP
   where <path> is the drive and directory created in step 2
                      - or -
                   a diskette drive letter if using the optional 
                   installation diskettes

   Follow the on-screen instructions.

5. After the installation is completed, you may delete the directory 
created in step 2 if you wish.


Copyright 2001, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies


PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home