SOFTPAQ NUMBER: SP18142
PART NUMBER: N/A
FILE NAME: N/A
TITLE: Remote ROM Flash Utilities for Compaq Evo Workstation W6000 (686P8 ROM)
VERSION: 1.08 Rev A
LANGUAGE: English (US)

CATEGORY: ROMPaqs

DIVISIONS: Workstations

PRODUCTS AFFECTED: Evo Workstation W6000: All Models

OPERATING SYSTEM: Microsoft Windows 2000
                  Microsoft Windows NT 4.0

SYSTEM CONFIGURATION: N/A

PREREQUISITES: A PXE capable computer connected to a remote configuration and program loading 
  tool for use on networks.  (Examples:  Altiris eXpress, LANDesk Configuration 
  Manager (LCM))

EFFECTIVE DATE: September 10, 2001

ELECTRONIC DISTRIBUTION ALLOWED: Yes

SOFTPAQ UTILITY VERSION: 5.0       

SUPERSEDES: N/A

DESCRIPTION:
This SoftPaq creates a set of utility files that can be used with a remote 
configuration tool such as Altiris eXpress to update or restore the System ROM 

in the Compaq Evo Workstation W6000 models with a 686P8 Family ROM.  It also 
includes the ROM Image.

The standard ROMPaq will not work for updating a PC remotely over a network.

The ROM Family and ROM date can be determined by running the Setup Utility by 
pressing F10 on the target computer during system power on of the computer, and 
viewing File/System Information.  This information can be saved into a text 
file by selecting File/Save to Diskette.

ENHANCEMENTS/FIXES:
 - Launches embedded NIC option ROM and enables it to shrink to occupy less DCH 
   space.
 - Improves error message display if a second processor has problems during POST.
 - Removes microcode support for B0 and B1 step Foster CPUs.  Adds support for C0 
   and D0 step.
 - Turns off SCSI LED when the SCSI controller is hidden or disabled through F10 
   Setup.
 - Enhances acoustics by lowering fan voltage.
 - Enhances thermal support for upcoming 2.0GHz and future Intel Xeon processor 
   speed increases.
 - Improves POST messages by adding a warning message in the case more options 
   ROMs are attempting to load than possible.
 - Improves multi-processor initialization to allow more configuration time for 
   the non-BootStrap processor.
 - When transitioning to ACPI mode, turns off system IDE hard drive timeout and 
   allows ACPI-capable operating systems to handle the IDE hard drive time out.
 - Adds support for new thermal alert chip in Pentium 4 products.
 - Corrects an issue in the El Torito (bootable CD) hard drive emulation support 
   that caused storage data errors when attempting to boot from a hard drive 
   emulating a CD that specified more than one sector in its Section Entry data 
   structure (e.g. Intelligent Disaster Recovery CD).
 - Corrects PCI configuration for Cardbus bridges.
 - Corrects issue with remote power off for NT 4.0 with multi-processors.

HOW TO USE:

1.  Download the SoftPaq to a directory on your hard drive.  The file downloaded is 
a self-extracting executable with a filename based on the SoftPaq Number above.

2.  Execute the downloaded file and follow the on-screen instructions.  Entering 
"Y" confirms the unpacking of several files.

3.  After the files have been created, you may delete the self-extracting file 
downloaded in step 1.

4.  Refer to the files README.TXT and REPSET.TXT for further information about the 
utility programs.


Copyright 2001, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.