| PaqPlace
For your Compaq |
Compaq SoftPaq Driver & Software Archive |
|
|
|
SP18020 — SNMP ConnectUPS card FW v3.60
| SoftPaq Number |
SP18020 |
| Filename |
sp18020.exe |
| Size |
1231K |
| Date |
2.01.2002 |
| Version |
3.60 rev A |
| Operating System |
All |
| Products Affected |
Systems Updated: - ProSignia, ProSignia VS, ProSignia 200/300/500, Prosignia Server 720/740 - Proliant 800/850R/1000/1200/1500/1600/1850R/2000/2500/3000/4000/4500/5000/5500/ 6000/6500/7000/8000/8500/DL380/ML350/ML370/ML530, Rack-Mountable Proliant Servers or Systempro, Systempro/e, Systempro/LT, Systempro/XL |
| Supersedes |
SP18017 |
Readme
SOFTPAQ NUMBER: SP18020
FILE NAME: SP18020.EXE
TITLE: SNMP ConnectUPS card FW v3.60
VERSION: 3.60 rev A
LANGUAGE: English
CATEGORY: ROMPaqs
DIVISION: Systems
PRODUCTS AFFECTED:
Systems Updated:
- ProSignia, ProSignia VS, ProSignia 200/300/500, Prosignia Server 720/740
- Proliant 800/850R/1000/1200/1500/1600/1850R/2000/2500/3000/4000/4500/5000/5500/
6000/6500/7000/8000/8500/DL380/ML350/ML370/ML530, Rack-Mountable Proliant
Servers or Systempro, Systempro/e, Systempro/LT, Systempro/XL
OPERATING SYSTEM: N/A
SYSTEM CONFIGURATION: N/A
EFFECTIVE DATE: 2.01.2002
ELECTRONIC DISTRIBUTION ALLOWED: Yes
SOFTPAQ UTILITY VERSION: 5.X
SUPERSEDES: SP18017
DESCRIPTION: This SNMP ConnectUPS card FW v3.60 diskettes allows a user to
upgrade the Firmware SNMP connection card
This SoftPaq will allow the SNMP ConnectUPS card to send a packet to connect
UPS' When UPS'are configured for a scheduled shutdown, thus allowing the shutdown
to occur.
Fixes (re ver 3.60):
1) When doing immediate (scheduled for 1s delay) shutdowns with SNMP, now sends correct delay to the UPS.
2) When sees ICMP Destination Unreachable (eg, because sent a trap to Centro machine, but Centro isn't listening for traps) changes the trap severity level of that host to "None" so that no more traps are sent to it.
This firwmare softpaq consists of one (1) diskette:
HOW TO USE:
1. Obtain one 1.44-MB diskette.
2. Download the SoftPaq to a directory on your hard drive and change
to that directory. The file that is downloaded is an executable with
a filename based on the SoftPaq Number above.
3. From that drive and directory, execute the downloaded file
and follow the on-screen instructions. You will be prompted to
insert a formatted diskette in a drive to create the diskette.
4. After the diskette has been created, you may delete the
SoftPaq file downloaded in step 2.
5. There are instruction included on the created disk, name = Upgrade Instructions.doc
follow these instructions to upgrade your SNMP adapter.
Copyright 2001, Compaq Computer Corporation. All rights reserved.
Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.
PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
|
Home
|