SOFTPAQ NUMBER: SP18002
PART NUMBER: N/A
FILE NAME: SP18002.EXE
TITLE:  Single Point Solution User Diskette Utility for
        Boot Controller Selection.
        

VERSION:  1.0

LANGUAGE: English

CATEGORY: UTILITY

DIVISIONS:  Systems

PRODUCTS AFFECTED:  All Compaq ProLiant Servers

OPERATING SYSTEM AND VERSION:  N/A

SYSTEM CONFIGURATION:  N/A

PREREQUISITE:  N/A

EFFECTIVE DATE:   September 26, 2001

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION: 2.X

SUPERSEDES:  N/A

DESCRIPTION:  This release provides a Single Point Solution User 
              diskette Utility for all Compaq ProLiant Servers.


New Features -

        None.



Problems Fixed -

       Addressed Configuring Fibre Channel Host Bus Adapters
       as boot devices.



Known Problems -

        None.



HOW TO USE:

1.  Obtain a formatted 1.44 MB diskette.

2.  Download the SoftPaq to a directory on your hard drive and change to that directory.
The file that is downloaded is SP18002.EXE.

3.  From that drive and directory, execute the SoftPaq file:
SP18002 [ENTER]
You will be prompted to place the formatted 1.44 MB diskette into a diskette drive to
create diskette.

4.  After the diskette is created, you may delete the downloaded file
SP18002.EXE if you wish.

5.  For installation instructions refer to Utility
Instructions below.


Utility Instructions

1.  Insert the Utility diskette into the bootable diskette drive.

2.  Turn unit off, then back on, to boot from the Utility diskette.

3.  System will boot into the Boot Controller Selection Utility, and there
    you will select boot devices.

4.  After selecting boot devices, press ESC key then F10 to save 
    selections.
   
    
Copyright 2001, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered trademarks of their
respective companies