SOFTPAQ NUMBER: SP17995
PART NUMBER: 254003-074
FILE NAME: N/A
TITLE: Compaq Server Diagnostics
VERSION: S10.37 C
LANGUAGE:  Spanish

CATEGORY: Diagnostics

DIVISIONS: Enterprise

PRODUCTS AFFECTED:
     ProLiant 8500: All Models
     ProLiant 8000: All Models
     ProLiant 7000: All Models
     ProLiant 6500: All Models
     ProLiant 6400R: All Models
     ProLiant 6000: All Models
     ProLiant 5500: All Models
     ProLiant 5000: All Models
     ProLiant 4500: All Models
     ProLiant 4000: All Models
     ProLiant 3000: All Models
     ProLiant 2500: All Models
     ProLiant 2000: All Models
     ProLiant 1850R: All Models
     ProLiant ML570: All Models
     ProLiant ML530: All Models
     ProLiant ML330: All Models
     ProLiant ML350: All Models
     ProLiant ML350-G2: All Models
     ProLiant ML350-G2: All Models
     ProLiant ML370: All Models
     ProLiant DL580: All Models
     ProLiant DL380: All Models
     Proliant DL370-G2: All Models
     Proliant DL380-G2: All Models
     ProLiant DL360: All Models
     ProLiant CL1850: All Models
     ProLiant CL380: All Models
     ProLiant 1600: All Models
     ProLiant 1500: All Models
     ProLiant 1200: All Models
     ProLiant 1000: All Models
     ProLiant 850R: All Models
     ProLiant 800: All Models
     ProLiant 400: All Models
     Prosignia Server 720: All Models
     Prosignia Server 740: All Models
     ProSignia 200: All Models
     ProSignia 300: All Models
     ProSignia 500: All Models
     ProSignia VS: All Models
     ProSignia 486: All Models
     ProSignia P5/60 SCSI: All Models
     SystemPro XL: All Models
     SystemPro: All Models
     SystemPro LT: All Models
     TaskSmart N-Series: All Models
     ProLiant DL320: All Models


OPERATING SYSTEM: Microsoft Windows 2000
                  Microsoft Windows NT 4.0
                  Microsoft Windows NT 3.51
                  Microsoft MS-DOS
                  Novell NetWare 5.x
                  Novell NetWare 4.x
                  Novell NetWare 3.x
                  SCO UnixWare 7
                  SCO OpenServer 5
                  SCO OpenServer 3
                  SCO OpenServer 2.1
                  Linux
                  Sun Solaris 8 Intel Platform Edition
                  Sun Solaris 7 Intel Platform Edition
                  Sun Solaris 2.6 Intel Platform Edition
                  IBM OS/2
                  Banyan VINES

SYSTEM CONFIGURATION: N/A


PREREQUISITES: N/A
EFFECTIVE DATE: 10/10/2001

ELECTRONIC DISTRIBUTION ALLOWED: Yes

SOFTPAQ UTILITY VERSION: 5

SUPERSEDES:
SP17881,SP17886,SP16367,SP16339,SP16285,sp16242,sp16100,


DESCRIPTION:
Compaq Server Diagnostics will display information about the computer's
hardware and  test the computer to ensure it is operating properly.



ENHANCEMENTS/FIXES
Fixed - ProLiant ML350-G2 Hang up in inspect at "Retrieving System Port Information".
Fixed - Device list now shows hard drives on the Intergrated Smart Array when the ROC chip is removed (Dumb Roc / SCSI) past the 10th drive posisition.
Fixed - Diagnostics Versions 10.35b to 10.37B did not recognize all the SCSI ID's on 32xx, 42xx and 43xx controllers.  The number of id's saved was limited to 7; drive 8 overwrote drive 1 information, 9 overwrote 2, etc.
Fixed - Inspect now shows all hard drives if slots were skipped.  On systems using 32xx, 42xx, and 43xx controllers.
Fixed - Long Load times with SCSI2.TM took 5 minutes to load and 5 minutes to id in diags when it should only take about 30 seconds.
Fixed - Long load time in Inspect while loading SCSI2 were removed.
NOTES:
The ProLiant ML330-G2 ATA Raid controller is only supported in the Raid 0 mode. (How it is shipped.)  
If you have a Raid 1 or 0+1 you will see failures on the seek test.  
The seek test will fail because it tries to access the backup drives directly and the system is hiding those drives.  
This is a known issue and does not indicate that your drive is not working properly.  
There is a customer advisory being drafted currently with more information.  
Version S10.38A Will remove the seek test from these configurations.


HOW TO USE:
1.  Download the SoftPaq to a directory on your hard drive. The file downloaded
is a self-extracting executable with a filename based on the SoftPaq Number.

2.  Execute the downloaded file and follow the on-screen instructions. Pressing
"Space Bar" to confirm the unpacking of files creates a new directory folder in
the download directory. The diskette image file, the image extraction tool, and
the batch file to create the diskette are unpacked into this newly created
directory.

3.  After the Diagnostic diskette has been created, you may delete the
self-extracting file downloaded in step one, as well as the directory folder
and files created in step two.

4.  Go to the system that you want to run Server Diagnostics on and power down
the system.

5.  Place the newly created Diagnostics diskette in Drive A:, and power up the
system.

6.  The system should then boot to Compaq Server Diagnostics.

Copyright 2001, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies