SOFTPAQ NUMBER: SP17924
PART NUMBER:  253250-002
FILE NAME: N/A
TITLE: Compaq ProLiant DL590/64 Server Diagnostics
VERSION: 1.01 Rev. A
LANGUAGE: English (US)

CATEGORY: Diagnostics

DIVISIONS: Enterprise

PRODUCTS AFFECTED: ProLiant DL590/64: All Models


OPERATING SYSTEM: Microsoft Windows XP 64 Limited Edition
                  RedHat Linux 64
                  EFI (Extensible Firmware Interface)


SYSTEM CONFIGURATION: N/A

PREREQUISITES: N/A

EFFECTIVE DATE: Aug 21, 2000

ELECTRONIC DISTRIBUTION ALLOWED: YES

SOFTPAQ UTILITY VERSION: 0      


DESCRIPTION:
Compaq ProLiant DL590/64 Server Diagnostics will display information about
the computer's hardware and test the computer to ensure it is operating
properly.


ENHANCEMENTS/FIXES:

Version 1.01A
  Memory.efi
    Fixed memory miscompare caused by cache writing into the area under test.
  Diag64.efi 
    Fixed various memory leaks.



Version 1.00A

The Diagnostic can identify and test the following devices:

  Processor(s)
    From 1 to 4 Itanium I800-4MB Processors 
    From 1 to 4 Itanium I733-2MB Processors 

  Memory
    Up to 64Gb of PC100 CL2 ECC Registered DIMMs Memory
    (using 64 1024MB DIMMs)

  Network Controller(s)
    Identification only

  Array Controllers
    Integrated Smart Array Controller (Ultra2) 
    Smart Array 5300 Controller
    Smart Array 532 Controller

  SCSI Hard drives
     9.1GB Pluggable Wide Ultra3 SCSI 10,000 rpm Drive 1"
    18.2GB Pluggable Wide Ultra3 SCSI 10,000 rpm Drive 1"
    36.4GB Pluggable Wide Ultra3 SCSI 10,000 rpm Drive 1"
     9.1GB Pluggable Wide Ultra3 SCSI 15,000 rpm Drive 1"
    18.2GB Pluggable Wide Ultra3 SCSI 15,000 rpm Drive 1"
    36.4GB Pluggable Wide Ultra3 SCSI 15,000 rpm Drive 1"

  Removable Media Storage
    Integrated LS-240 Megabyte Diskette Drive 
    Integrated 24x IDE CD-ROM - Slim Line

  Input / Output (IO)
    Keyboard
    Mouse
    USB controller
    Parallel port
    Serial ports



NOTES:

  1. This version of the software cannot view AND/OR test certain options
     that are supported by the DL590/64.

     A. Network Adapters
        Testing of network controllers requires EFI network drivers, these
        drivers were unavailable at the time of the diagnostics release.
        This should not effect network support in higher level OSes
        (i.e. RedHat Linux 64 and Windows XP 64 Limited Edition)

     B. SCSI Controllers are not identified or tested.
        Compaq 64-Bit/66MHz Single Channel Wide Ultra3 SCSI Adapter and 
        Compaq 64-Bit/66MHz Dual Channel Wide Ultra3 SCSI Adapter

     C. Tape Drives are not tested.

     D. Fibre Channel devices are not tested.
    

  2. Diagnostics does not identify add on modules for the Compaq SMART Array
     5300.  
  
     Diagnostics names all 5300 series controllers "Compaq SMART Array 5300."  
     Diagnostics can correctly test the "basic" functionality of the 5300
     controller card.  The advanced features provided by the add-on cards are
     not tested.  
  
     This applies to the following options:

       Smart Array 5302/32 Controller
       Smart Array 5302/64 Controller
       Smart Array 5304/128 Controller
       128MB Cache Module for Smart Array 5302 Controller
       Advanced Data Guarding Module for Smart Array 5302 Controller


  





Instructions for using Compaq ProLiant DL590/64 Server Diagnostics:

1.  Download the SoftPaq to a directory on your hard drive. The file 
    downloaded is a self-extracting executable with a filename based on the
    SoftPaq number.

2.  Execute the downloaded file and it will unzip to the folder
    "Diagnostics64" on your hard drive.

3.  Insert an LS-120 diskette in your LS-240 drive.

4.  Copy all files under the "Diagnostics64" directory. But, do not copy the
    "Diagnostics64" folder to the LS-120 diskette.

5.  On the DL590/64 system that you want to run the Compaq ProLiant DL590/64 
    Server Diagnostics, go to the EFI boot manager. If you booted with the
    diskette in the system, exit the diagnostics to return to the EFI boot
    manager screen.

6.  Insert the LS-120 diskette labeled "Compaq ProLiant DL590/64 Server
    Diagnostics" into drive A: of the DL590/64 system.

7.  Load the Diagnostics Multiprocessor Driver:
    a. From the EFI Boot Manager screen, select 'Boot Configuration'
    b. From the 'Boot Configuration' window, select 'Install EFI Driver'
    c. In the prompt window, enter 'DIAGMP.EFI'
    d. In the next prompt window, enter 'Diagnostics Multiprocessor Driver'

8.  Reboot

9.  Welcome to Compaq ProLiant DL590/64 Server Diagnostics

10. Select 'Inspect Information', then select <create>
    Note: User must press F2 to save information to disk

11. Run 'Automatic Diagnostics'
    A. Select 'Set System Options' (Stop on error, etc.)
    B. Select 'Number of Loops'

12. Save Logs
    A. To save test times, go to 'Logging Status', select <view> and press F2
    B. Error logs are created by default.  To change this, go to the
       System Setting menu, and toggle the 'Log to Diag.log' selection.

13. Exit Compaq ProLiant DL590/64 Server Diagnostics.
    Press 'Esc', select yes when asked if you are sure you want to exit.

14. Unload MP driver 
    A. From the EFI Boot Manager screen, select 'Boot Configuration'
    B. From the 'Boot Configuration' window, select 'Uninstall EFI Driver'
    C. A list of drivers will be displayed, select 'Diagnostics 
    Multiprocessor Driver' and press ENTER.  
   
    Note: The user names this driver in Step 7, if the user did not use the
    suggested name then delete the driver name that was used instead.

    D. FAILURE TO UNLOAD THIS DRIVER WILL RESULT IN AN ERROR BOX BEING
       DISPLAYED DURING EVERY SYSTEM REBOOT, WHICH ASKS FOR THE "Diagnostics
       Multiprocessor Driver".   

    E. *** WARNING *** FAILURE TO UNLOAD THE "Diagnostics Multiprocessor 
       Driver" BEFORE BOOTING INTO AN OPERATING SYSTEM MAY RESULT IN NOT 
       BEING ABLE TO BOOT THE OPERATING SYSTEM.

Copyright 2001, Compaq Computer Corporation.  All rights reserved.